Over many decades, significant efforts have been made to improve the strength-elongation
product of advanced high strength steels (AHSSs) by creating tailored multi-phase …

Ultrafine austenite-ferrite duplex medium Mn steels often show a discontinuous yielding
phenomenon, which is not commonly observed in other composite-like multiphase …

The third-generation advanced high strength medium manganese steels aim at high-
performance automobile sheet steel applications. Micro-alloying of steels is considered an …

This paper systematically investigated the influence of microstructural characteristics such
as grain size and morphology on the yielding behavior of a cold rolled medium-Mn Fe-6.4 …

A remarkable Lüders-type localized deformation having a huge Lüders strain of 0.4 was
observed in tensile deformation of an ultra-fine grained austenitic stainless steel fabricated …

The objective of the present study is to clarify the mechanism of dynamic strain aging (DSA)
causing serrations in tensile flow curves of Fe-5.15 Mn-0.15 C-0.37 Si-0.0039 N (wt%) …

A medium-Mn steel (Fe-12Mn-3Al-0.05 C wt%) was designed using Thermo-Calc®
simulations to balance the fraction and stacking fault energy of reverted austenite …

The deformation mechanisms of a novel medium Mn steel (Fe–0.14 C–7.8 Mn–1.65 Al–0.11
Zr, wt%) were investigated through mixed multiphase preservation-intercritical annealing …

Abstract A Fe-8.9 Mn-1.59 Si-1.0 Al-0.25 C medium-Mn steel have achieved a superior
combination of strength and ductility, ie, the product of strength and elongation (PSE) of 66.5 …

Medium‐Mn steels have received significant attention from the steel industry as strong
candidate materials for next‐generation advanced high‐strength steels. These steels can be …