Cable-in-conduit conductors: lessons from the recent past for future developments with low and high temperature superconductors
L Muzzi, G De Marzi, A Di Zenobio… - Superconductor …, 2015 - iopscience.iop.org
We review progress in the design of high field superconducting cable-in-conduit conductors
(CICCs) for fusion applications, with special attention to the results of recent key …
(CICCs) for fusion applications, with special attention to the results of recent key …
Recent progress of the JT-60SA project
H Shirai, P Barabaschi, Y Kamada - Nuclear Fusion, 2017 - iopscience.iop.org
The JT-60SA project has been implemented for the purpose of an early realization of fusion
energy. With a powerful and versatile NBI and ECRF system, a flexible plasma-shaping …
energy. With a powerful and versatile NBI and ECRF system, a flexible plasma-shaping …
Progress of the JT-60SA project
P Barabaschi, Y Kamada, H Shirai… - Nuclear …, 2019 - iopscience.iop.org
The JT-60SA project was initiated in June 2007 under the framework of the Broader
Approach Agreement and Japanese National Fusion Programme for an early realization of …
Approach Agreement and Japanese National Fusion Programme for an early realization of …
[HTML][HTML] Influence of a high magnetic field to the design of EU DEMO
The limitation considered in the definition of DEMO in 2016 to not exceed the magnetic field
strength foreseen in the ITER machine is reviewed here. At the time, a Nb 3 Sn …
strength foreseen in the ITER machine is reviewed here. At the time, a Nb 3 Sn …
JT-60SA superconducting magnet system
Y Koide, K Yoshida, M Wanner, P Barabaschi… - Nuclear …, 2015 - iopscience.iop.org
The most distinctive feature of the superconducting magnet system for JT-60SA is the
optimized coil structure in terms of the space utilization as well as the highly accurate coil …
optimized coil structure in terms of the space utilization as well as the highly accurate coil …
JT-60SA TF coils: experimental check of hydraulic operating conditions
P Decool, H Cloez, G Jiolat, M Tena… - IEEE Transactions …, 2016 - ieeexplore.ieee.org
The general design of the JT-60SA toroidal field (TF) system relies on the use of a single-
channel cable-in-conduit conductor defined in agreement with all participants of the project …
channel cable-in-conduit conductor defined in agreement with all participants of the project …
Conceptual design of a subcritical research reactor for inertial fusion energy with the J-EPoCH facility
A Iwamoto, R Kodama - High Energy Density Physics, 2020 - Elsevier
Abstract The Japan Establishment for a Power-laser Community Harvest (J-EPoCH) is
proposed as a next generation laser facility having multi-purpose high repetition laser …
proposed as a next generation laser facility having multi-purpose high repetition laser …
PEEC-based analysis of complex fusion magnets during fast voltage transients with H-matrix compression
Partial element equivalent circuit-based methodology appears very attractive for the analysis
of fast voltage transients, which may appear across and inside the magnets in fusion devices …
of fast voltage transients, which may appear across and inside the magnets in fusion devices …
JT-60SA magnet system status
S Davis, WA Maksoud, P Barabaschi… - IEEE Transactions …, 2017 - ieeexplore.ieee.org
The JT-60SA experimental device will be the world's largest superconducting tokamak when
it is assembled in 2019 in Naka, Japan (R= 3 m, a= 1.2 m). It is being constructed jointly by …
it is assembled in 2019 in Naka, Japan (R= 3 m, a= 1.2 m). It is being constructed jointly by …
Structural optimisation of the DEMO alternative divertor configurations based on FE and RBF mesh morphing
The DEMO tokamak exhibits extraordinary complexity due to the constraints and
requirements pertaining to different fields of physics and engineering. The multidisciplinary …
requirements pertaining to different fields of physics and engineering. The multidisciplinary …