Comparison of traditional processing and additive manufacturing technologies in various performance aspects: a review
X Kaikai, G Yadong, Z Qiang - Archives of Civil and Mechanical …, 2023 - Springer
Additive manufacturing, also known as 3D printing, is a revolutionary manufacturing
technology. This paper compares the differences between additive manufacturing …
technology. This paper compares the differences between additive manufacturing …
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation
H Zhang, K Zhang, H Zhou, Z Lu, C Zhao, X Yang - Materials & Design, 2015 - Elsevier
The hot deformation behavior of a nickel-based superalloy was investigated by means of
isothermal compression tests in the strain rate range of 0.001–10 s− 1 at 1110° C …
isothermal compression tests in the strain rate range of 0.001–10 s− 1 at 1110° C …
Study on constitutive modeling and processing maps for hot deformation of medium carbon Cr–Ni–Mo alloyed steel
C Zhang, L Zhang, W Shen, C Liu, Y Xia, R Li - Materials & Design, 2016 - Elsevier
The hot deformation behavior of medium carbon Cr–Ni–Mo alloyed steel 34CrNiMo was
studied in the wide temperature range of 900–1150° C and the strain rate of 0.002–5 s− 1 …
studied in the wide temperature range of 900–1150° C and the strain rate of 0.002–5 s− 1 …
An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation
The objective of the study described here is to evaluate the effect of temperature, strain rate,
and strain on the microstructure of dynamically recrystallized nickel–chromium alloy (800H) …
and strain on the microstructure of dynamically recrystallized nickel–chromium alloy (800H) …
Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy
A metastable β Ti–10V–3Fe–3Al–0.27 O (wt.%) alloy was subjected to thermo-mechanical
processing to induce α and ω phase formation, so that the alloy can exhibit the features …
processing to induce α and ω phase formation, so that the alloy can exhibit the features …
Microstructure and mechanical behaviour of an advanced powder metallurgy nickel base superalloy processed through hot isostatic pressing route for aerospace …
B Sreenu, R Sarkar, SSS Kumar, S Chatterjee… - Materials Science and …, 2020 - Elsevier
An advanced powder metallurgy (P/M) nickel-base superalloy envisaged for aerospace
applications is realized through hot isostatic pressing (HIPing) of inert gas atomized powder …
applications is realized through hot isostatic pressing (HIPing) of inert gas atomized powder …
Microstructure evolution and underlying mechanisms during the hot deformation of 718Plus superalloy
B Xie, B Zhang, H Yu, H Yang, Q Liu, Y Ning - Materials Science and …, 2020 - Elsevier
Abstract 718Plus superalloy was investigated to obtain a detailed and fundamental
understanding of the microstructure evolution and the underlying mechanisms. Isothermal …
understanding of the microstructure evolution and the underlying mechanisms. Isothermal …
The morphology and characteristics evolution of MC carbide during homogenization in hard-to-deform superalloy GH4975
H Jiang, X Xiang, J Dong - Journal of Alloys and Compounds, 2022 - Elsevier
Microstructure control of hard-to-deform nickel-base superalloy with high content of γ′
phase is a hot topic, while the characteristic of MC carbide is often ignored. In present work …
phase is a hot topic, while the characteristic of MC carbide is often ignored. In present work …
Characterization of microstructures and hot-compressive behavior of GH4169 superalloy by kinetics analysis and simulation
P Geng, G Qin, J Zhou, T Li, N Ma - Journal of Materials Processing …, 2021 - Elsevier
Mechanical performance of hot forming products is strongly related to microstructures and
deformation behaviors during hot processing. Through dynamic recrystallization (DRX) …
deformation behaviors during hot processing. Through dynamic recrystallization (DRX) …
Hot deformation behavior and new grain size model of hot extruded FGH4096 superalloy during hot compression
W Liu, Z Liu, H Zhang, J Ruan, H Huang, X Zhou… - Journal of Alloys and …, 2023 - Elsevier
The deformation behavior and grain size models of hot extruded (HEXed) FGH4096
superalloy at the temperature of 1040–1130℃ and the strain rate of 0.001–1 s− 1 were …
superalloy at the temperature of 1040–1130℃ and the strain rate of 0.001–1 s− 1 were …