Over the past years, a large number of studies about the implementation of adhesive
bonding in timber engineering were published. Current practice is to use two-component …

Splitting failure in beam splice joints with glued-in rods parallel to grain in endwood
subjected to pure shear is considered. A simple theoretical expression based on beam-on …

This paper presents research on plywood frame corners jointed to glulam beams and
columns by means of glued-in hardwood dowels. The frame corner was made of a solid …

Glued-in Rods (GiR) have proven to be a particularly good method for connecting timber
structures, in which steel or FRP steel rods are yet commonly bonded with two-component …

Densified wood (DW) dowel is worth considering as an alternative to steel rod for timber
joints with glued-in rods, because it is more naturally harmonized with timber members, and …

Joints with axially loaded glued-in hardwood dowels were studied. A dowel whose length is
ten times as long as diameter is glued into a loose-fit hole. The dowel hole clearance is filled …

Holzklebstoffe aus erneuerbaren Rohstoffen haben in den letzten Jahren verstärkt
Aufmerksamkeit erregt. Die Nutzung von bio-basierten Holzklebstoffen ermöglicht es nicht …

Moment-resisting joints using hardwood dowels glued-in parallel to grain are considered.
Simple theoretical models readily usable for practical design are presented for calculation of …

Glued-in rods have in recent years been widely used in timber structures. Such connections
provide an efficient means of transferring moments, and they are architecturally attractive …