Materials for Indian Space Program: An Overview
SVS Narayana Murty, SC Sharma - Journal of the Indian Institute of …, 2022 - Springer
Materials are the backbone of any engineering structure and aerospace materials
technologies are therefore closely guarded, in view of their dual use. Indian national space …
technologies are therefore closely guarded, in view of their dual use. Indian national space …
Effect of Ti additions on microstructure and mechanical properties of Cu–Cr–Zr alloy
C Shi, M Ma, B Yang, Y Liu, Y Huang, Y Du - Journal of Materials Science & …, 2023 - Elsevier
Abstract Ti additions in Cu–Cr–Zr alloys are useful for achieving high mechanical properties.
In this work, the influence of Ti contents (0.25 wt%, 0.6 wt%, and 1.02 wt%) on the …
In this work, the influence of Ti contents (0.25 wt%, 0.6 wt%, and 1.02 wt%) on the …
Orientation relationships between precipitates and matrix and their crystallographic transformation in a Cu–Cr–Zr alloy
C Xia, Y Pang, Y Jia, C Ni, X Sheng, S Wang… - Materials Science and …, 2022 - Elsevier
The orientation relationships between Cr precipitates and matrix in a Cu–Cr–Zr alloy with
various aged states were investigated by transmission electron microscopy and High …
various aged states were investigated by transmission electron microscopy and High …
Effect of deformation mode on hot deformation characteristics and microstructural evolution in Cu-Cr-Zr-Ti alloy
Uniaxial (UC) and plane strain compression (PSC) tests were performed on the Cu-Cr-Zr-Ti
alloy specimens to investigate the effect of the deformation mode on the stress-strain …
alloy specimens to investigate the effect of the deformation mode on the stress-strain …
Dynamic recrystallization behavior and numerical simulation of 2209 duplex stainless steel
J Shi, M Shuai, X Chen, Y Wu, Z Chu, L Tuo - Materials Today …, 2024 - Elsevier
A dynamic recrystallization model was established and finite element simulation was carried
out using deform software to compare and analyze the recrystallization law under different …
out using deform software to compare and analyze the recrystallization law under different …
Forming limit and failure characterization of as-received and bi-axial prestrained Cu-Cr-Zr-Ti alloy sheets in the context of multistage forming
The characterization of forming limit utilizing Cu-Cr-Zr-Ti alloy sheets during the multistage
forming process is imperative for successfully fabricating thrust chamber liners used in …
forming process is imperative for successfully fabricating thrust chamber liners used in …
Investigation of Tensile Flow Behavior of Al–Mg Alloy at Warm Temperature: Constitutive Modelling and Microstructural Evolution
The flow behavior of the AA5052 alloy in a fully annealed state was analyzed across a range
of temperatures: 25, 100, 200, and 300° C, and five strain rates: 0.001, 0.005, 0.01, 0.05, and …
of temperatures: 25, 100, 200, and 300° C, and five strain rates: 0.001, 0.005, 0.01, 0.05, and …
Metallic Materials R&D in Vikram Sarabhai Space Centre: Past, Present and Future
S Somanath, RM Cherian, SC Sharma… - Indian Metallurgy: The …, 2023 - Springer
Metallic Materials R&D in Vikram Sarabhai Space Centre: Past, Present and Future |
SpringerLink Skip to main content Advertisement SpringerLink Account Menu Find a journal …
SpringerLink Skip to main content Advertisement SpringerLink Account Menu Find a journal …
Dynamic Recrystallization Behavior and Numerical Simulation of Duplex Stainless Steel
J Shi, M Shuai, X Chen, Y Wu - Available at SSRN 4866417 - papers.ssrn.com
The softening law of 2209 duplex stainless steel during hot working is investigated by
Gleeble compression experiments. Predictive models were developed to estimate the critical …
Gleeble compression experiments. Predictive models were developed to estimate the critical …