A review study on thermal stability of high entropy alloys: Normal/abnormal resistance of grain growth
Poor performance of advanced engineering materials, during long term servicing at high
temperature, is closely related to thermal stability of the microstructures. Instability of the …
temperature, is closely related to thermal stability of the microstructures. Instability of the …
Grain growth in high-entropy alloys (HEAs): A review
Grain growth is an unavoidable phenomenon occurring during processing of
multicomponent high-entropy alloys (HEAs) and medium-entropy alloys (MEAs), which …
multicomponent high-entropy alloys (HEAs) and medium-entropy alloys (MEAs), which …
Microstructure, wear and oxidation behavior of AlCrFeNiX (X= Cu, Si, Co) high entropy alloys produced by powder metallurgy
Abstract AlCrFeNiX (X= Cu, Si, Co) high entropy alloys (HEAs) were produced by
mechanical alloying and sintering. The effects of the “X" additive on the microstructure …
mechanical alloying and sintering. The effects of the “X" additive on the microstructure …
Accelerated design of high entropy alloys by integrating high throughput calculation and machine learning
A Bansal, P Kumar, S Yadav, VS Hariharan… - Journal of Alloys and …, 2023 - Elsevier
Designing high entropy alloys (HEAs) from a large compositional space is challenging. The
design process is accelerated by integrating computational techniques. The current study …
design process is accelerated by integrating computational techniques. The current study …
Resistance sintering of CoCrFeNiAlx (x= 0.7, 0.85, 1) high entropy alloys: Microstructural characterization, oxidation and corrosion properties
The cyclic oxidation and electrochemical corrosion behaviors of CoCrFeNiAl x (x= 0.7, 0.85
and 1 mol) high entropy alloys (HEAs) produced by resistance sintering were explored. In …
and 1 mol) high entropy alloys (HEAs) produced by resistance sintering were explored. In …
Effect of Al content on wear and corrosion resistance of Ni-based alloy coatings by laser cladding
X Feng, H Wang, X Liu, C Wang, H Cui, Q Song… - Surface and Coatings …, 2021 - Elsevier
Abstract Inconel 625+ x Al (x= 0, 2.5, 5.0, 7.5, 10.0) alloy coatings were prepared by laser
cladding. The addition of Al promoted the formation of the BCC phase, which changed the …
cladding. The addition of Al promoted the formation of the BCC phase, which changed the …
In situ study on plastic deformation mechanism of Al0. 3CoCrFeNi high-entropy alloys with different microstructures
Abstract Al 0.3 CoCrFeNi high-entropy alloys (HEAs) have attracted the attention of
researchers owing to their excellent mechanical properties. In this study, Al 0.3 CoCrFeNi …
researchers owing to their excellent mechanical properties. In this study, Al 0.3 CoCrFeNi …
Role of the rare-earth elements effect in transforming the oxidation behavior of AlxCoCrFeNi high entropy alloys
The immersion method leading to the formation of nano-dispersion of Gd 2 O 3 on the
surface of Al x (CoCrFeNi) 100− x alloys (x= 3; 6; 9) is used to improve their corrosion …
surface of Al x (CoCrFeNi) 100− x alloys (x= 3; 6; 9) is used to improve their corrosion …
Electrodeposited nanocrystalline medium-entropy alloys–an effective strategy of producing stronger and more stable nanomaterials
For decades, enhancing both strength and thermal stability in nanocrystalline materials for
structural applications has been a significant challenge. Recently, entropy-based …
structural applications has been a significant challenge. Recently, entropy-based …
A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures
A Co25. 1Cr18. 8Fe23. 3Ni22. 6Ta8. 5Al1. 7 (at.%) eutectic high-entropy alloy (EHEA)
consisting of face-centered-cubic (FCC) and C14 Laves phases was produced by powder …
consisting of face-centered-cubic (FCC) and C14 Laves phases was produced by powder …