Sezawa SAW devices: Review of numerical-experimental studies and recent applications
F Hadj-Larbi, R Serhane - Sensors and Actuators A: Physical, 2019 - Elsevier
The technological field of surface acoustic wave (SAW) devices has progressed rapidly. The
fundamental Rayleigh mode has been mainly used in SAW applications, while the …
fundamental Rayleigh mode has been mainly used in SAW applications, while the …
FEM Analysis of Sezawa Mode SAW Sensor for VOC Based on CMOS Compatible AlN/SiO2/Si Multilayer Structure
A Finite Element Method (FEM) simulation study is conducted, aiming to scrutinize the
sensitivity of Sezawa wave mode in a multilayer AlN/SiO2/Si Surface Acoustic Wave (SAW) …
sensitivity of Sezawa wave mode in a multilayer AlN/SiO2/Si Surface Acoustic Wave (SAW) …
Near‐surface environmentally forced changes in the Ross Ice Shelf observed with ambient seismic noise
Continuous seismic observations across the Ross Ice Shelf reveal ubiquitous ambient
resonances at frequencies> 5 Hz. These firn‐trapped surface wave signals arise through …
resonances at frequencies> 5 Hz. These firn‐trapped surface wave signals arise through …
Sezawa wave acoustic humidity sensor based on graphene oxide sensitive film with enhanced sensitivity
IE Kuznetsova, VI Anisimkin, VV Kolesov… - Sensors and Actuators B …, 2018 - Elsevier
The measurement of humidity is very important for air control in ambient, industry, cars,
houses, closed apartments, museums, atomic power stations, etc. In the present work the …
houses, closed apartments, museums, atomic power stations, etc. In the present work the …
Methylated Poly(ethylene)imine Modified Capacitive Micromachined Ultrasonic Transducer for Measurements of CO2 and SO2 in Their Mixtures
A gravimetric gas detection device based on surface functionalized Capacitive
Micromachined Ultrasound Transducers (CMUTs) was designed, fabricated and tested for …
Micromachined Ultrasound Transducers (CMUTs) was designed, fabricated and tested for …
Super-High-Frequency Low-Loss Sezawa Mode SAW Devices in a GaN/SiC Platform
This article presents a comprehensive study of the performance of Sezawa surface acoustic
wave (SAW) devices in SweGaN QuanFINE ultrathin GaN/SiC platform, reaching …
wave (SAW) devices in SweGaN QuanFINE ultrathin GaN/SiC platform, reaching …
Design performance and frequency response analysis of SAW-based sensor for dichloromethane gas sensing amidst the COVID-19
M Kumar, D Bhadu - Journal of Vibration Engineering & Technologies, 2021 - Springer
Background To avoid the risk of increase in the rate of human infection is a big challenge for
healthcare staffs during the treatment of patients affected from corona virus disease-2019 …
healthcare staffs during the treatment of patients affected from corona virus disease-2019 …
Characterisation of aluminium nitride films and surface acoustic wave devices for microfluidic applications
Aluminium nitride (AlN) films with different thicknesses (from 2.3 to 4.7 μm) were deposited
onto high resistivity silicon substrates using magnetron sputtering. Crystalline and bonding …
onto high resistivity silicon substrates using magnetron sputtering. Crystalline and bonding …
[PDF][PDF] Design and analysis of SAW based MEMS gas sensor for the detection of volatile organic gases
S Johnson, T Shanmuganantham - Carbon, 2014 - academia.edu
This paper portrays the design and analysis of SAW based MEMS gas sensor for the
detection of volatile organic gases. The gas sensor consists of interdigitated transducers …
detection of volatile organic gases. The gas sensor consists of interdigitated transducers …
Surface acoustic wave based pumping in a microchannel
Pumping and manipulation of liquids in microfluidic channels are important for many
mechanical, chemical and biomedical applications. Surface acoustic wave based devices …
mechanical, chemical and biomedical applications. Surface acoustic wave based devices …