MMCs are broadly used in several industrial applications because of their excellent
mechanical properties. Hard materials and composites cannot be machined by typical …

The aeronautical industry relies on high-performance equipment that demands materials
with exceptional engineering attributes, such as the Ti6Al4V alloy. However, the complexity …

Machinability comparisons have been made between superalloys such as Incoloy 825,
Inconel 603 XL, Monel K400, and Inconel 600 using wire cut electrical discharge machining …

The paper investigates the influence of boron carbide powder (B4C) mixed in dielectric fluid
on EDM of Inconel X-750 alloy. The process parameters selected as discharge current (Ip) …

In this research, an attempt was made to reinforce aluminium with graphite particles and use
it as a tool material with the objective of combining the properties of aluminium and graphite …

The impact of machine feed rates of Wire Electric Discharge Machining on the kerf-width (K-
width), material-removal-rate (MR-R), and surface-roughness (SR) in the machining of …

Abstract Wire Electrical Discharge Machining (WEDM) is a non-conventional machining
technique that utilizes electrical discharges to remove material from a workpiece. This study …

AISI 316L stainless steel materials of thickness 3 mm have been united by tungsten inert gas
(TIG) welding in square butt joint configuration as per Box-Behnken design technique of …

For the last few decades a tremendous demand has been observed in terms of developing
new engineering materials to cater the need of the modern century especially in the …

Wire electrical discharge machining (WEDM) is a stochastic method in which an enormous
number of mechanism limits are comprised. It is very precise to hand-pick the exact grouping …