Sol–gel synthesis and characterization of α-Fe2O3 nanoparticles
K Raja, MM Jaculine, M Jose, S Verma… - Superlattices and …, 2015 - Elsevier
The α-Fe 2 O 3 nanoparticles have been successfully synthesized via sol–gel technique.
The lattice parameters, the lattice strain and crystallite size were investigated by X-ray …
The lattice parameters, the lattice strain and crystallite size were investigated by X-ray …
Магнитные наночастицы: достижения и проблемы химического синтеза
ДА Баранов, СП Губин - Радиоэлектроника. Наносистемы …, 2009 - cyberleninka.ru
В обзоре рассмотрены последние достижения химического синтеза магнитных
наночастиц. Обсуждены проблемы стабилизации, контроля структуры, формы …
наночастиц. Обсуждены проблемы стабилизации, контроля структуры, формы …
Magnetic characterization of micropatterned Nd–Fe–B hard magnetic films using scanning Hall probe microscopy
M Kustov, P Laczkowski, D Hykel… - Journal of Applied …, 2010 - pubs.aip.org
Scanning Hall probe microscopy has been used for the quantitative measurement of the z-
component (out-of-plane) of the stray magnetic fields produced by Nd–Fe–B hard magnetic …
component (out-of-plane) of the stray magnetic fields produced by Nd–Fe–B hard magnetic …
Физика и химия коллоидных систем
СА Сергеев, ОА Иноземцева, ДН Браташов… - 2016 - elibrary.ru
В учебном пособии кратко изложена часть теоретического материала и приведены
описания лабораторных работ, посвященные физике и химии коллоидных систем …
описания лабораторных работ, посвященные физике и химии коллоидных систем …
Direct chemical synthesis of high coercivity air-stable SmCo nanoblades
Ferromagnetic air-stable SmCo nanoparticles have been produced directly using a one-step
chemical synthesis method. X-ray diffraction studies confirmed the formation of hexagonal …
chemical synthesis method. X-ray diffraction studies confirmed the formation of hexagonal …
Preparation of YCo5, PrCo5 and SmCo5 anisotropic high-coercivity powders via mechanochemistry
Polydispersed RCo 5 powders consisting mostly of single crystal particles with an average
size ranging from 280 nm to 400 nm have been prepared mechanochemically for R= Y, Pr …
size ranging from 280 nm to 400 nm have been prepared mechanochemically for R= Y, Pr …
Structural, magnetic, and mechanical properties of 5μm thick SmCo films suitable for use in microelectromechanical systems
A Walther, D Givord, NM Dempsey… - Journal of Applied …, 2008 - pubs.aip.org
5 μ m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of
the influence of deposition temperature (T dep⩽ 600 C) on the structural, magnetic, and …
the influence of deposition temperature (T dep⩽ 600 C) on the structural, magnetic, and …
Preparation, characterization, and modeling of ultrahigh coercivity Sm–Co thin films
O Akdogan, H Sepehri‐Amin… - Advanced Electronic …, 2015 - Wiley Online Library
Isotropic Sm–Co thin films with different SmxCoy phases (1: 7, 1: 5, and 2: 7) are prepared
by triode sputtering of targets of variable composition. A room‐temperature coercivity value …
by triode sputtering of targets of variable composition. A room‐temperature coercivity value …
Correlation of chemical coordination and magnetic ordering in ( and 0.26)
The crystal structure and magnetic ordering in Sr 3 YCo 4 O 10.5+ δ, δ= 0.02 and 0.26
compounds have been revisited in a detailed neutron diffraction study. The ordering is of G …
compounds have been revisited in a detailed neutron diffraction study. The ordering is of G …
The influence of grain morphology and easy axis orientation on the coercivity of Sm (Co0. 9Cu0. 1) 5 thin films
Abstract Sm (Co 0.9 Cu 0.1) 5 single-layer thin films and Sm (Co 0.9 Cu 0.1) 5/Fe 2 Co
exchange coupled bilayer films with c-axis in the plane (IP) and out of the plane (OOP) …
exchange coupled bilayer films with c-axis in the plane (IP) and out of the plane (OOP) …