Permeability-porosity relationship in RTM for different fiberglass and natural reinforcements
E Rodriguez, F Giacomelli… - Journal of composite …, 2004 - journals.sagepub.com
This study investigates the permeability-porosity relationship for glass and natural fiber mats.
The estimation of the permeability-porosity relationship for glass mats is not new and has …
The estimation of the permeability-porosity relationship for glass mats is not new and has …
The review about the numerical modelling and analysis of 3D woven fabrics
The 3D woven fabrics have superior mechanical behaviours thanks to their extraordinary
structural design and properties. By this means, they and their reinforced composites have …
structural design and properties. By this means, they and their reinforced composites have …
[HTML][HTML] Mesoscopic scale analyses of textile composite reinforcement compaction
Transverse compaction of textile composite reinforcements is an important deformation
mode arising during composite forming and manufacture. The mesoscopic simulations of the …
mode arising during composite forming and manufacture. The mesoscopic simulations of the …
Compression and microstructure of fibre plain woven cloths in the processing of polymer composites
RA Saunders, C Lekakou, MG Bader - Composites Part A: Applied Science …, 1998 - Elsevier
The compression of a typical fibre plain woven cloth was studied experimentally by
performing a series of mechanical tests on dry and resin impregnated cloths and from …
performing a series of mechanical tests on dry and resin impregnated cloths and from …
[HTML][HTML] Macro-and micro-impregnation phenomena in continuous manufacturing of fabric reinforced thermoplastic composites
C Mayer, X Wang, M Neitzel - Composites Part A: Applied Science and …, 1998 - Elsevier
Macro-and micro-impregnation of molten thermoplastic polyamide 6.6 into glass and carbon
fabrics during continuous manufacturing using a double belt press was investigated …
fabrics during continuous manufacturing using a double belt press was investigated …
Compression in the processing of polymer composites 1. A mechanical and microstructural study for different glass fabrics and resins
RA Saunders, C Lekakou, MG Bader - Composites Science and …, 1999 - Elsevier
This paper focuses on the compression of fibre reinforcements during the processing of
polymer composites, covering a range of fabrics, namely a plain weave, a twill, a satin and a …
polymer composites, covering a range of fabrics, namely a plain weave, a twill, a satin and a …
[HTML][HTML] Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows
KM Pillai - Composites Part A: Applied Science and …, 2002 - Elsevier
Correct modeling of resin flow in liquid composite molding (LCM) processes is important for
accurate simulation of the mold-filling process. Recent experiments indicate that the physics …
accurate simulation of the mold-filling process. Recent experiments indicate that the physics …
Impregnation of compressible fiber mats with a thermoplastic resin. Part I: theory
V Michaud, JAE Månson - Journal of composite materials, 2001 - journals.sagepub.com
In many cases of composite processing by liquid matrix impregnation, the fiber
reinforcement is compressed when it comes in contact with the liquid and then relaxes as …
reinforcement is compressed when it comes in contact with the liquid and then relaxes as …
A micromechanical compaction model for woven fabric preforms. Part II: Multilayer
With nesting between adjacent layers and inter-layer packing, the microstructure and the
compaction behaviour of a multilayer woven fabric preform are much more complicated than …
compaction behaviour of a multilayer woven fabric preform are much more complicated than …
[HTML][HTML] Resin flow analysis with fiber preform deformation in through thickness direction during Compression Resin Transfer Molding
Resin flow during Compression Resin Transfer Molding (CRTM) can be best described and
analyzed in three phases. In the first phase, a gap is created by holding the upper mold …
analyzed in three phases. In the first phase, a gap is created by holding the upper mold …