The fundamental component of the data used in chemical calculations is vapor–liquid
equilibrium (VLE) information. The VLE data between several routinely used extractants and …

To separate the azeotrope of (allyl alcohol+ water) by extractive distillation, N-methyl-2-
pyrrolidone, N-methyl formamide and ethylene glycol were selected as extractive agents …

Allyl alcohol and water can form an azeotrope with the minimum boiling point. To separate
allyl alcohol from its aqueous solution by distillation, the deep eutectic solvents (DESs) were …

For separation of the azeotrope isopropyl alcohol and diisopropyl ether by extractive
distillation, 2-ethoxyethanol and butyl acetate were adopted as extractive solvents, and the …

In order to obtain the vapour-liquid equilibrium (VLE) data of the binary and ternary systems
related to the separation of thioglycolic acid (TGA) by-products, in this research, the VLE …

In this work, the isobaric vapor–liquid equilibrium (VLE) data for ethyl acetate+ propyl
acetate, ethyl acetate+ propylene carbonate, and propyl acetate+ propylene carbonate …

This work fundamentally explains the inhibitory effect of adjuvant on water droplet
evaporation in pesticide application. An analytical droplet evaporation model coupled with …

Allyl alcohol and water can form an azeotrope with the minimum boiling point. To separate
the azeotrope of allyl alcohol and water by salt distillation, three salts calcium chloride …

Toluene, an excellent organic solvent, is used in various chemical reactants and carbon
nanomaterials, and its recycling can potentially alleviate related environmental problems …

A boiling model was proposed and coupled with a quasi-dimensional evaporation model to
simulate the vaporization of a bi-component droplet under wide-temperature environments …