[HTML][HTML] Enhancing compressive performance in 3D printed pyramidal lattice structures with geometrically tailored I-shaped struts

MA Uddin, I Barsoum, S Kumar, A Schiffer - Materials & Design, 2024 - Elsevier
This study examines the compressive response of geometrically tailored pyramidal lattice
structures composed of struts with I-shaped cross-sections. Geometrically tailored pyramidal …

Identification of modal parameters of a model turbine blade with a curved surface under random excitation with a three-dimensional continuously scanning laser …

K Yuan, WD Zhu - Measurement, 2023 - Elsevier
Modal parameters of a model turbine blade with a curved surface excited by white noise are
identified by a novel general-purpose 3D continuously scanning laser Doppler vibrometer …

A novel general-purpose three-dimensional continuously scanning laser Doppler vibrometer system for full-field vibration measurement of a structure with a curved …

K Yuan, WD Zhu - Journal of Sound and Vibration, 2022 - Elsevier
Abstract Three-dimensional (3D) full-field vibration measurement is significant to structures,
especially those with curved surfaces. A triaxial accelerometer and a commercial non …

A novel demodulation method with a reference signal for operational modal analysis and baseline-free damage detection of a beam under random excitation

LF Lyu, K Yuan, WD Zhu - Journal of Sound and Vibration, 2024 - Elsevier
A novel demodulation method with a reference signal is developed for operational modal
analysis and damage detection of a beam structure under random excitation. The novel …

Dynamic analyses of composite corrugated sandwich plates filled with magnetorheological elastomer resting on elastic foundation

J Zhao, G Fan, J Guan, H Li, Z Gao, H Ma - Engineering Structures, 2023 - Elsevier
The main barrier to the application of corrugated structures in vibration suppression is their
low loss factor. The use of magnetorheological elastomer (MRE) as a novel type of smart …

Experimental dynamic characterization of both surfaces of structures using 3D scanning laser Doppler vibrometer

Y Chen, AS Escalera Mendoza, DT Griffith - Experimental Techniques, 2023 - Springer
Usually, only one surface or one side of 3D structures is measured in Scanning Laser
Doppler Vibrometer (SLDV) tests due to test setup and instrumentation limitations. However …

In-plane operating deflection shape measurement of an aluminum plate using a three-dimensional continuously scanning laser Doppler vibrometer system

K Yuan, WD Zhu - Experimental Mechanics, 2022 - Springer
Background In-plane vibration is significant to a structure and has been accurately solved by
many numerical methods; however, there are still not enough studies on its experimental …

Experimental and numerical investigation of the structural dynamic characteristics for both surfaces of a wind turbine blade

Y Chen, DT Griffith - Journal of Vibration and Control, 2023 - journals.sagepub.com
Wind turbine design and operation will benefit from a better understanding of blade
dynamics. Usually, only one surface or one side of a 3D structure is measured in Scanning …

Modal parameter identification of a quayside container crane based on data-driven stochastic subspace identification

X Xu, X Zhang, W Zhu, X Gu - Journal of Vibration Engineering & …, 2021 - Springer
Background Modal parameters of a quayside container crane can reflect the vibration
performance of a structure at work. Identifying these parameters through modal tests can be …

A novel mirror-assisted method for full-field vibration measurement of a hollow cylinder using a three-dimensional continuously scanning laser Doppler vibrometer …

K Yuan, WD Zhu - Mechanical Systems and Signal Processing, 2024 - Elsevier
A novel general-purpose three-dimensional (3D) continuously scanning laser Doppler
vibrometer (CSLDV) system was recently developed by the authors to measure 3D vibration …