Mechanical alloying (MA) is a solid-state powder processng technique involving repeated
welding, fracturing, and rewelding of powder particles in a high-energy ball mill. Originally …

This paper describes the effect of silicon on the manufacturing process, structure, phase
composition, and selected properties of titanium aluminide alloys. The experimental …

An fcc phase has been reported to form in mechanically alloyed titanium-aluminum alloys.
This fcc phase forms after an amorphous phase during milling and has been found to be …

In the present review article, firstly, the experimental observations of the binary metallic glass
formation by various glass-producing techniques are briefly summarized. Secondly, a …

A primary challenge associated with TiAl alloys is their low ductility at room temperature.
One approach to overcome this flaw is attaining ultrafine grains in the alloy's final …

Abstract Ti-Al-Nb ternary powder mixtures containing 24Al-11Nb, 25Al-25Nb, 37.5 Al-12.5
Nb, and 28.5 Al-23.9 Nb (at. pct) were mechanically alloyed in a SPEX 8000 mixer mill using …

Mixtures of elemental titanium and aluminium powders of overall composition TixAl1+ x (x=
0.02, 0.3, 0.4, 0.5, 0.6, 0.7, 0.75, 0.8) were mechanically alloyed in a planetary-type ball mill …

Formation of a homogeneous nanocrystalline CuIn0. 7Ga0. 3Se2 alloy was achieved by
mechanical alloying of blended elemental Cu, In, Ga, and Se powders in a planetary ball …

With the aim of producing metastable precursors for tailoring TiAl based composite, five
compositional powder blends of Ti–Al–Si system, ie Ti65Al17Si18, Ti65Al21Si14 …

Amorphous boron powders with small particle size, narrow size distribution and high purity
are very important in the high-tech fields. Mechanochemical synthesis was used to prepare …