[HTML][HTML] Strain rate effect on the thermomechanical behavior of NiTi shape memory alloys: a literature review
A review of experiments and models for the strain rate effect of NiTi Shape Memory Alloys
(SMAs) is presented in this paper. Experimental observations on the rate-dependent …
(SMAs) is presented in this paper. Experimental observations on the rate-dependent …
Contribution of ultrasonic surface rolling process to the fatigue properties of TB8 alloy with body-centered cubic structure
D Liu, D Liu, M Guagliano, X Xu, K Fan… - Journal of Materials …, 2021 - Elsevier
The effect of ultrasonic surface rolling process (USRP) as a severe plastic deformation
technology was investigated on the evolution of microstructure, residual stress and surface …
technology was investigated on the evolution of microstructure, residual stress and surface …
Hot deformation behaviour of Ti alloys: A review on physical simulation and deformation mechanisms
Titanium and its alloys, owing to their properties like high strength, toughness, corrosion
resistance and thermal stability, are employable in various engineering and medical …
resistance and thermal stability, are employable in various engineering and medical …
Strain rate effects on tensile deformation behaviors of Ti-10V-2Fe-3Al alloy undergoing stress-induced martensitic transformation
X Ma, F Li, J Cao, J Li, Z Sun, G Zhu, S Zhou - Materials Science and …, 2018 - Elsevier
In this study, the effects of strain rate on trigger stress (σ T) of stress-induced martensitic
transformation (SIMT) and mechanical properties of Ti-10V-2Fe-3Al alloy were investigated …
transformation (SIMT) and mechanical properties of Ti-10V-2Fe-3Al alloy were investigated …
Microstructure evolution in metastable β titanium alloy subjected to deep cryogenic treatment
K Gu, B Zhao, Z Weng, K Wang, H Cai… - Materials Science and …, 2018 - Elsevier
Deep cryogenic treatment (DCT) has been an effective method for modification of materials.
It is usually combined with the traditional heat treatment of steels. However, the effect of its …
It is usually combined with the traditional heat treatment of steels. However, the effect of its …
Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al
Z Chen, D Zhong, Q Sun, X Ma - Materials Science and Engineering: A, 2021 - Elsevier
Dynamic mechanical behavior of a metastable β titanium alloy Ti–10V–2Fe–3Al (Ti-1023)
with α+ β dual-phase structure is investigated by a split Hopkinson tension bar (SHTB) …
with α+ β dual-phase structure is investigated by a split Hopkinson tension bar (SHTB) …
Microstructure and texture evolution of TB8 titanium alloys during hot compression
QY Yang, M Ma, YB Tan, S Xiang, F Zhao, YL Liang - Rare Metals, 2021 - Springer
In this study, microstructure and texture evolution of TB8 titanium alloys during hot
deformation were investigated by using electron back-scattered diffraction (EBSD) analysis …
deformation were investigated by using electron back-scattered diffraction (EBSD) analysis …
An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy
H Kou, Y Chen, B Tang, Y Cui, F Sun, J Li… - Journal of alloys and …, 2014 - Elsevier
The formation of crystallographic texture in a β-titanium alloy (Ti–15Mo–3Al–2.7 Nb–0.2 Si,
wt.%) during the dynamic recrystallization (DRX) in hot rolling process was studied. The …
wt.%) during the dynamic recrystallization (DRX) in hot rolling process was studied. The …
Melt flow and grain refining in laser oscillating welding of β-21S titanium alloy
Z Lei, Y Chen, H Zhou, X Wang, J Liu, P Xia - Optics & Laser Technology, 2022 - Elsevier
Abstract Properties and serviceability of laser welded joints depend on the defect, weld
geometry, and microstructures, which in turns are affected by molten pool behaviors. In this …
geometry, and microstructures, which in turns are affected by molten pool behaviors. In this …
The effect of strain rate on deformation-induced α′ phase transformation and mechanical properties of a metastable β-type Ti–30Zr–5Mo alloy
X Zhao, Y Wang, H Xue, N Jia, Y Liu… - Journal of Alloys and …, 2022 - Elsevier
The effect of strain rate on stress-induced α′ phase transformation and room temperature
tensile deformation flow behavior of a metastable β-type Ti–30Zr–5Mo alloy at strain rates …
tensile deformation flow behavior of a metastable β-type Ti–30Zr–5Mo alloy at strain rates …