Alloy 718 is a Ni-based superalloy commonly used for parts of aircraft engines and power
plants where very high demands on high-temperature yield strength, creep and corrosion …

Advancements in thermo-mechanical processing of Ni-based superalloys enable
manufacturing of engineering parts with superior mechanical properties. Forged aeroengine …

In the present work, fracture forming limit diagram (FFLD) of two different solution treated ie
970° C (HT970) and 1070° C (HT1070) Inconel-718 sheets were evaluated by carrying out …

A promising approach to decrease deformation load and improve ductility during forming of
Inconel-718 (IN718) is through the use of solution treated blanks. In the present work, IN718 …

The present study explores a combination of numerical and simulation approaches to
generate a process map for identifying the regimes of conduction and keyhole modes of …

The hot cracking susceptibility of a new superalloy G27 was investigated by Varestraint
weldability testing. The influence of pre-weld solution annealing conditions recommended …

In this article, process parameters such as laser power, deposition speed, and powder feed
rate are varied at three levels, and their effect on geometrical characteristics and …

Wrought, as-cast, and homogenized sheets were welded using the tungsten inert gas (TIG)
process. The precipitates in both the base metal and the coarse-grained heat-affected zone …

Herein, the effects of microstructure on high-temperature properties (hot ductility and stress
rupture life) were investigated in alloy 718 investment castings manufactured with different …

In this study, to investigate the impact of heating rate, the IN738LC superalloy was
solutionized both in standard and salt bath conditions. For this purpose, the samples were …