Wear resistant steels are commonly categorized by their hardness, and in the case of
quenched wear resistant steels, their Brinell hardness grades are widely considered almost …

This work focused on ultra-high strength steel strengthened by Cu-rich multistructured
precipitates and toughened by bainite. A Cr–Mo bearing bainitic steel was designed and …

A new Ti and Mo micro-alloyed hot-rolled high strength sheet steel was developed by
controlling thermomechanical controlled processing (TMCP) schedule, in particular focusing …

A carbide-free bainite steel of 0.29 C–2.50 Si-1.50 Mn-1.0 Mo-0.97 Cr (wt.%) with no voids
and cracks was fabricated via laser powder deposition (LPD). Different post-treatment plans …

High strength steel (HSS) has gained its popularity in high-rise and large-span structures in
which fire is one of the extreme scenarios that needs to be considered in structural design. In …

The microstructures and the mechanical properties of 30MnSiCrAlNiMo low-carbon steel
were systematically optimized by a series of heat-treatment processes, and the heat …

Artificial intelligence is widely employed in metallurgy for its ability to solve complex
phenomena, which are associated with the learning process of previously obtained …

The susceptibility of ultra-high strength martensitic steels to cracking during processing and
service has hindered their extensive application. This paper presents a novel strategy to …

Thermo-mechanical controlled processing (TMCP) is employed to obtain the required level
of mechanical properties of contemporary HSLA steel plates utilized for gas and oil pipeline …

The development of comprehensive and reliable microstructure characterization tools is very
necessary for the understanding and modelling of both the formation of different phases …