Nitrogen in chromium–manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics
L Mosecker, A Saeed-Akbari - Science and Technology of …, 2013 - iopscience.iop.org
Nitrogen in austenitic stainless steels and its effect on the stacking fault energy (SFE) has
been the subject of intense discussions in the literature. Until today, no generally accepted …
been the subject of intense discussions in the literature. Until today, no generally accepted …
Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9 wt.% medium Mn steel
M Kuzmina, D Ponge, D Raabe - Acta Materialia, 2015 - Elsevier
We study grain boundary embrittlement in a quenched and tempered Fe–Mn high-purity
model martensite alloy using Charpy impact tests and grain boundary characterization by …
model martensite alloy using Charpy impact tests and grain boundary characterization by …
Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
Conventional martensitic steels have limited ductility due to insufficient microstructural strain-
hardening and damage resistance mechanisms. It was recently demonstrated that the …
hardening and damage resistance mechanisms. It was recently demonstrated that the …
Research progress and development tendency of nitrogen-alloyed austenitic stainless steels
Y Lang, H Qu, H Chen, Y Weng - Journal of Iron and Steel Research …, 2015 - Springer
Research progress on nitrogen-alloyed austenitic stainless steels was expounded through
the development of steel grades. In addition, hot topics in the research of nitrogen-alloyed …
the development of steel grades. In addition, hot topics in the research of nitrogen-alloyed …
Stacking fault driven phase transformation in CrCoNi medium entropy alloy
Phase transformation is an effective means to increase the ductility of a material. However,
even for a commonly observed face-centered-cubic to hexagonal-close-packed (fcc-to-hcp) …
even for a commonly observed face-centered-cubic to hexagonal-close-packed (fcc-to-hcp) …
Mechanical property comparisons between CrCoNi medium-entropy alloy and 316 stainless steels
We systematically compared the mechanical properties of CrCoNi, a recently emerged
prototypical medium-entropy alloy (MEA) with face-centered-cubic (FCC) structure, with …
prototypical medium-entropy alloy (MEA) with face-centered-cubic (FCC) structure, with …
Deformation nanotwins suppress shear banding during impact test of CrCoNi medium-entropy alloy
We report deformation bands ahead of the crack tip in a CrCoNi alloy under impact loading,
and analyze the effects of deformation twinning on strain localization in the form of shear …
and analyze the effects of deformation twinning on strain localization in the form of shear …
Effects of carbon and nitrogen on austenite stability and tensile deformation behavior of 15Cr-15Mn-4Ni based austenitic stainless steels
N Saenarjhan, JH Kang, SJ Kim - Materials Science and Engineering: A, 2019 - Elsevier
The austenite stability and deformation behavior of 15Cr-15Mn-4Ni based austenitic
stainless steels alloyed with C or N are studied. Stability of austenite against martensitic …
stainless steels alloyed with C or N are studied. Stability of austenite against martensitic …
Substructure development, martensitic transformation and rapid work-hardening in an as-cast interstitial substituted N atom in FeMnCoCr high-entropy alloy
The microstructural evolution and room-temperature mechanical properties of nitrogen-
added Fe50Mn30Co10Cr10 as-cast high-entropy alloy were investigated. Interestingly, an …
added Fe50Mn30Co10Cr10 as-cast high-entropy alloy were investigated. Interestingly, an …
The dominating role of austenite stability and martensite transformation mechanism on the toughness and ductile-to-brittle-transition temperature of a quenched and …
The effect of austenite stability and martensite transformation (MT) mechanism on the tensile
and impact properties has been investigated for Fe-0.3 C-2.7 Mn-1.7 Si (wt.%) quenched …
and impact properties has been investigated for Fe-0.3 C-2.7 Mn-1.7 Si (wt.%) quenched …