This paper presents an overview of the corrosion behavior of titanium (Ti) alloys in both
acidic and saline solutions. The solutions covered in this review are essentially the typical …

The corrosion behaviour of new generation titanium alloys (β-type with low modulus) for
medical implant applications is of paramount importance due to their possible detrimental …

After preforming by selective laser sintering and subsequently post-heating at 1000° C and
1200° C, porous Ti–Mo alloys with 4, 6 and 8wt.% Mo contents display two characteristic …

A new quaternary Ti–20Nb–10Zr–5Ta alloy with β-near microstructure was obtained. Its
native passive film composition and its modification and corrosion resistance after 2000 …

A biocompatible Ti-12Mo alloy was fabricated by metal injection moulding (MIM) using non-
spherical titanium, molybdenum powders and a purposely designed binder. The density …

Abstract Porous Ti–(4–10) Mo alloys (4, 6, 8 and 10 wt.% Mo) were prepared from elemental
metallic powders by indirect selective laser sintering. This investigation focuses on porous …

The native passive film on the new Ti–15Ta–5Zr alloy surface contains the protective TiO 2,
Ta 2 O 5 and ZrO 2 oxides (XPS analysis). The decrease of the corrosion current densities …

The structural and electrochemical properties of a selective laser sintered porous Ti–10Mo
alloy were investigated. As the sintering temperature increases from 1100 to 1400° C, the …

Over the last decade, new titanium alloys are developed in different areas of implantology.
The aim of this study was to characterize a new Ti-Al-Nb-Ta-Mo based alloy, with high …

The present study explores the microstructural characteristics and electrochemical
responses of different TiMoZrTa alloys designed for biomedical implantation. The alloys …