The ITER magnet system uses cable-in-conduit conductor (CICC) technology with individual
strands twisted in several stages resulting in a rope-type cable, which is inserted into a …

For large scale magnets wound with cable-in-conduit conductors, the safe operation of the
joints is of paramount importance to guarantee adequate reliability and stability margin of …

JackPot is a new model that is used to analyse how and to what extend current non-
uniformity among strands in a cable-in-conduit conductor (CICC) affects its performance …

The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable bundles, wound
in different stages, which are twisted to counter coupling loss caused by time-changing …

In this paper we report the main test results obtained on the Poloidal Field Conductor Insert
coil (PFI) for the International Thermonuclear Experimental Reactor (ITER), built jointly by …

A short sample of the NbTi cable-in-conduit conductor (CICC) manufactured for the ITER PF
insert coil has been tested in the SULTAN facility at CRPP. The short sample consists of two …

The inter-strand contact resistance and AC losses were measured on an International
Thermonuclear Experimental Reactor (ITER) poloidal field (PF) coil joint in a parallel applied …

The flexible nature of the cable bundles in the sizeable cable-in-conduit-conductors for ITER
containing more than a thousand strands, in combination with a void fraction of around 30 …

Within the framework of the design analysis of ITER PF coil joints, a model is developed that
simulates the coupling loss between strands in a cable-in-conduit conductor (CICC). The …

The results of simulations with the CUDI–CICC code on the poloidal field insert sample
(PFIS) tested in the SULTAN test facility are presented. The interpretations are based on …