Nonconventional machining processes like Electrochemical micromachining (ECMM)
provide better surface finish without thermal and mechanical defects on the workpiece …

The bipolar plate (BP) is one of the main drivers of the polymer electrolyte membrane fuel
cell (PEMFC) stack cost, and must also perform some critical functions simultaneously within …

The present study deals with an investigation of the hybrid electric discharge (ED)
machining process executed in a magnetic field for improving process performance …

This paper presents a new approach for sidewall insulation of microtool by dip coating using
liquid solution made of polymer and resin dissolved in isopropyl alcohol and use of acetone …

The electrolytic magnetic abrasive finishing process (EMAF) is hybrid machining, which
combines electrochemical machining (ECM) with the magnetic abrasive finishing process …

The demand for the surface integrity of complex structures is drastically increasing in the
field of aerospace, marine and automotive industry. Therefore, Inconel alloy, due to its …

The need for ultraprecision finishing has grown, and magnetic field-assisted finishing has
shown potential for overcoming some challenges. This study evaluates the scientific …

The present research focuses on the development of modified electrochemical magnetic
abrasive finishing set up to reduce the issues like abrasive washing and electrolytic short …

Formation of spikes prevents achievement of the better material removal rate (MRR) and
surface finish while using plain NaNO3 aqueous electrolyte in electrochemical machining …

Electrochemical machining (ECM) is an effective method for machining a blisk. Because a
blisk often has several tens to hundreds of blades and only one channel can be machined at …