In this study, both the digital image correlation (DIC) and depth-sensing indentation (DSI)
measurements were performed to investigate the non-uniform local mechanical behaviors of …

Temperature variation during the welding will cause different solid-state phase
transformations in the welding area and result in a heat-affected zone (HAZ) between the …

In this work, we first review the previous work done on statistical nanoindentation by different
researchers, highlighting the main problems that have been found and possible proposed …

This research aimed to investigate the heat-affected zone of lean duplex stainless steel
grade X2CrNiN22-2. Different heat-affected zone microstructures and grain morphologies …

The article considers the problem of assessing the hardening of a butt-welded joint made of
structural steel 09G2S during ball-rod hardening of a steel plate. The problem of ensuring …

This paper presents an investigation on the local damage of the reinforced concrete (RC)
tunnels subjected to the ballistic missile attack using finite element (FE) analysis. For the …

In this study, we investigated the composition and mechanical properties of metallurgical
phases present in the ASTM A36 steels subjected to postfire temperatures using …

The coarse-grain heat-affected zone (CGHAZ) is often the most fragile part of the weld
region due to hard phases and coarse grains generated during the welding …

This study investigates the microstructure and nano-hardness distribution across the
thickness of an H-section steel beam, specifically designed for seismic and fire resistance …

Secondary hardening by precipitation of alloy carbides during tempering in an experimental
Cr-Mo-V alloy steel was studied under continuous and isothermal conditions. Measurements …