SHS Processing and Consolidation of Ta–Ti–C, Ta–Zr–C, and Ta–Hf–C Carbides for Ultra‐High‐Temperatures Application
VV Kurbatkina, EI Patsera… - Advanced …, 2018 - Wiley Online Library
This review addresses the structure and phase formation mechanisms of self‐propagating
high‐temperature synthesis (SHS) of single‐phase complex carbides Ta–Ti/Zr/Hf–C, as well …
high‐temperature synthesis (SHS) of single‐phase complex carbides Ta–Ti/Zr/Hf–C, as well …
A Review of Research Progress on Ti (C, N)-Based Cermet Binder by Intermetallic Compounds and High-Entropy Alloys
L Wang, J Bai, Y Wang, Z Men - Materials, 2024 - mdpi.com
Ti (C, N)-based cermet is a kind of composite material composed of a metal binder phase
and a Ti (C, N)-hard phase, which is widely used in the fields of cutting machining and wear …
and a Ti (C, N)-hard phase, which is widely used in the fields of cutting machining and wear …
Influence of Mo2C and TaC additions on the microstructure and mechanical properties of Ti (C, N)-based cermets
C Liu, N Lin, YH He - Ceramics International, 2016 - Elsevier
In this paper, the effects of Mo 2 C and TaC additions on the microstructure and mechanical
properties of Ti (C, N)-based cermets prepared through the powder metallurgical method …
properties of Ti (C, N)-based cermets prepared through the powder metallurgical method …
Crater wear mechanisms of TiCN–Ni–WC cermets during dry machining
TiCN–Ni-based cermets are attractive cutting tools because of the combination of high
hardness and wear resistance with improved toughness and thermal shock resistance. The …
hardness and wear resistance with improved toughness and thermal shock resistance. The …
Production of ultra-high temperature carbide (Ta, Zr) C by self-propagating high-temperature synthesis of mechanically activated mixtures
EI Patsera, EA Levashov, VV Kurbatkina… - Ceramics …, 2015 - Elsevier
The combustion temperatures and rates of mechanically activated (MA) Ta–Zr–C mixtures
depending on the initial temperature T 0 are determined. The self-heating phenomenon is …
depending on the initial temperature T 0 are determined. The self-heating phenomenon is …
Effect of TaC on plastic deformation of WC–Co and Ti (C, N)–WC–Co
G Östberg, K Buss, M Christensen, S Norgren… - International Journal of …, 2006 - Elsevier
The plastic deformation resistance of metal cutting inserts made from a WC–Co cemented
carbide, a Ti (C, N)–WC–Co cermet and corresponding materials with additions of TaC has …
carbide, a Ti (C, N)–WC–Co cermet and corresponding materials with additions of TaC has …
High temperature oxidation resistance of (Ti, Ta)(C, N)-based cermets
Cermets based on titanium–tantalum carbonitride were oxidized in static air between 800° C
and 1100° C for 48 h. The thermogravimetric and microstructural study showed an …
and 1100° C for 48 h. The thermogravimetric and microstructural study showed an …
Grain growth in Ti (C, N)‐based cermets during liquid‐phase sintering
Q Yang, W Xiong, G Zhang… - Journal of the American …, 2015 - Wiley Online Library
Growth behavior of Ti‐based carbonitride ceramic grains in two high‐Mo Ti (C, N)‐based
cermets with Ni and Ni–20Cr (wt%) binders was investigated during liquid‐phase sintering …
cermets with Ni and Ni–20Cr (wt%) binders was investigated during liquid‐phase sintering …
Characterization of oxide scales to evaluate high temperature oxidation behavior of Ti (C, N)-based cermets in static air
Q Yang, W Xiong, S Li, H Dai, J Li - Journal of Alloys and Compounds, 2010 - Elsevier
Two Ti (C, N)-based cermets with Ni and Ni–20Cr metallic binder were oxidized at 800° C
and 1000° C for up to 100h in static air, and the oxide scales and the transition layers formed …
and 1000° C for up to 100h in static air, and the oxide scales and the transition layers formed …
Microstructure and properties of Ti (C, N)–Mo2C–Fe cermets
Z Guo, J Xiong, M Yang, J Wang, L Sun, Y Wu… - International Journal of …, 2009 - Elsevier
Ti (C, N)–15% Mo2C–20wt% Fe cermets are prepared according to conventional powder
metallurgical techniques. The microstructures and properties of the novel cermets are …
metallurgical techniques. The microstructures and properties of the novel cermets are …