Spark plasma sintering of ceramic matrix composite of TiC: microstructure, densification, and mechanical properties: a review
The incessant quest in fabricating enhanced ceramic materials for use in aerospace,
chemical plants, as a cutting tool, and other industrial applications has opened the way for …
chemical plants, as a cutting tool, and other industrial applications has opened the way for …
Invited article: The fast readout low noise camera as a versatile x-ray detector for time resolved dispersive extended x-ray absorption fine structure and diffraction …
JC Labiche, O Mathon, S Pascarelli… - Review of scientific …, 2007 - pubs.aip.org
Originally conceived and developed at the European Synchrotron Radiation Facility (ESRF)
as an “area” detector for rapid x-ray imaging studies, the fast readout low noise (FReLoN) …
as an “area” detector for rapid x-ray imaging studies, the fast readout low noise (FReLoN) …
Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC
In this study, we studied the effects of nano-sized WC addition (0, 1.5 and 3 wt%) on
microstructure and thermomechanical properties of TiC-based ceramics. WC-doped TiC …
microstructure and thermomechanical properties of TiC-based ceramics. WC-doped TiC …
Sintered (Ti, W) C Carbides
J Jung, S Kang - Scripta Materialia, 2007 - Elsevier
Sintered (Ti, W) C carbides were prepared from (Ti, W) C solid solution powder at 1510° C.
The powder was produced by milling a mixture of carbon and oxides and then reducing it at …
The powder was produced by milling a mixture of carbon and oxides and then reducing it at …
WC-Ti coatings deposited via cold gas spray and modified by laser and furnace heat treatments
L Baiamonte, G Pulci, A Gisario, L Paglia… - Journal of Thermal …, 2021 - Springer
This work is focused on furnace and laser post-treatment and characterization of WC-Ti
cermet coatings obtained by cold gas spray technique. The main purposes of this study are …
cermet coatings obtained by cold gas spray technique. The main purposes of this study are …
Structure, phase composition and mechanical properties of hard alloy treated by intense pulsed electron beams
VV Uglov, AK Kuleshov, EA Soldatenko… - Surface and Coatings …, 2012 - Elsevier
Phase and structural changes in surface layers of WC–TiC–Co hard alloy treated by intense
pulsed electron beams (IPEB) with electron energy of 20kV are studied. IPEB energy density …
pulsed electron beams (IPEB) with electron energy of 20kV are studied. IPEB energy density …
Spark plasma sintering of TiC ceramic with tungsten carbide as a sintering additive
L Cheng, Z Xie, G Liu - Journal of the European Ceramic Society, 2013 - Elsevier
By adding a small amount of tungsten carbide (WC) as sintering aids, nearly fully dense TiC
ceramics were obtained by spark plasma sintering at 1450–1600° C. The results show that …
ceramics were obtained by spark plasma sintering at 1450–1600° C. The results show that …
Al–Ni intermetallics obtained by SHS; A time-resolved X-ray diffraction study
Intermetallic compounds in the Al–Ni system were prepared by Self-propagating high-
temperature synthesis (SHS). The front high speed in the range of 1–100mm/s–typical of …
temperature synthesis (SHS). The front high speed in the range of 1–100mm/s–typical of …
Spark plasma sintering of WC-Ti powder mixtures and properties of obtained composites
Three WC-Ti powder mixtures with 5, 10 and 15 wt% titanium were sintered by the spark
plasma sintering technique. The microstructures and phase compositions of the samples …
plasma sintering technique. The microstructures and phase compositions of the samples …
Formation of hardened layer in WC–TiC–Co alloy by treatment of high intensity pulse ion beam and compression plasma flows
The effect of treatment by high intensity pulse ion beam (HPIB) and compression plasma
flow (CPF) with energy density greater than 10J/cm2 on the phase and element composition …
flow (CPF) with energy density greater than 10J/cm2 on the phase and element composition …