This paper summarizes the wear behaviour of Al-composites reinforced with ceramic
materials. The influence of the mechanical parameters such as applied load, sliding velocity …

Abstract Aluminum/graphite (Al/Gr) composites have been used as self-lubricating materials
due to the superior lubricating effect of graphite during sliding. This paper summarizes …

Mapping friction and wear behaviours as a function of material composition and operating
conditions is a valuable tool, assisting in material selection for component design. The …

Present work describes the development of Al-Si/sillimanite reinforced composites via stir
casting route. Sillimanite is abundant mineral available in coastal regions of India and has …

The friction maps and wear maps for Ag/MoS 2/WS 2 nanocomposite under different sliding
speeds and normal forces were constructed using the Response Surface Classification …

Al 2 O 3 and CeO 2 particles reinforced Ni-base alloy composite coatings were prepared on
aluminum alloy 7005 by plasma spray. The microstructure, microhardness, fracture …

Wear behaviour of Al1100-coconut shell ash (CSA) composites at high temperature is
investigated. The composites such as Al-5% CSA, Al-10% CSA and Al-15% CSA is …

An Al2014–alumina (Al2O3) composite's characteristics are significantly influenced by the
reinforcement particle size variation. Therefore, this study examines the microstructure …

Abstract Silicon nitride (Si 3 N 4) is a widely used reinforcement material to improve the
mechanical properties of the aluminium matrix composites. Aluminium alloy (AA 6063) …

The friction and abrasive wear behavior of WC-12Co and Cr 3 C 2–25NiCr HVOF sprayed
coatings were investigated. The coefficient of friction and abrasive wear rate decreased with …