During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Micro-alloying design of wrought magnesium (Mg) alloys is an important strategy to achieve
high mechanical properties at a low cost. In the last two decades, significant progress has …

In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …

We elucidate the effect of lanthanum (La) on the grain refinement of Mg-3Sn-1Mn alloy
during accumulative hot rolling. The lath-shaped Mg 2 Sn phase in the Mg-3Sn-1Mn alloy is …

Magnesium is among the lightest structural metals available, with the capacity to replace
traditional alloys in mass-saving applications while still providing increased stiffness and …

Abstract The Mg–La–Zn alloys exhibit good mechanical properties both at room and
elevated temperatures due to the formation of intermetallic compounds. However, the …

This study investigates the effects of fine and coarse undissolved particles in a billet of the
Mg–7Sn–1Al–1Zn (TAZ711) alloy on the dynamic recrystallization (DRX) behavior during …

In this work, the effects of extrusion ratios (ER) and temperatures (ET) on the microstructure
and mechanical properties of Mg–6.0 Zn–2.0 Yb–0.5 Zr (wt.%) extrusion alloys are …

In this study, the effects of Ca addition on the microstructural characteristics and mechanical
properties of a Mg–Bi–Al alloy extruded at high speed were investigated by analyzing …

In the field of specialty electronics and communications, there is a critical demand for
magnesium (Mg) alloy sheets that possess exceptional mechanical properties and …