Detailed chemical kinetic models for the combustion of hydrocarbon fuels
JM Simmie - Progress in energy and combustion science, 2003 - Elsevier
The status of detailed chemical kinetic models for the intermediate to high-temperature
oxidation, ignition, combustion of hydrocarbons is reviewed in conjunction with the …
oxidation, ignition, combustion of hydrocarbons is reviewed in conjunction with the …
Fuel flexibility influences on premixed combustor blowout, flashback, autoignition, and stability
This paper addresses the impact of fuel composition on the operability of lean premixed gas
turbine combustors. This is an issue of current importance due to variability in the …
turbine combustors. This is an issue of current importance due to variability in the …
Analysis of the ignition induced by shock wave focusing equipped with conical and hemispherical reflectors
B Zhang, Y Li, H Liu - Combustion and Flame, 2022 - Elsevier
The interaction of a plane shock wave in air with concave profiles has been used in the past
to understand the nature of shock wave focusing. The current study examines the complex …
to understand the nature of shock wave focusing. The current study examines the complex …
An ignition delay and kinetic modeling study of methane, dimethyl ether, and their mixtures at high pressures
The development of accurate chemical kinetic models capable of predicting the combustion
of methane and dimethyl ether in common combustion environments such as compression …
of methane and dimethyl ether in common combustion environments such as compression …
[HTML][HTML] Deflagration and detonation induced by shock wave focusing at different Mach numbers
Shock wave focusing is an effective way to create a hot spot or a high-pressure and high-
temperature region at a certain place, showing its unique usage in detonation initiation …
temperature region at a certain place, showing its unique usage in detonation initiation …
Laminar flame speeds and ignition delay times of methane–air mixtures at elevated temperatures and pressures
Measurements on laminar flame speeds and ignition delay times of methane/air mixtures at
elevated pressures and temperatures were carried out in a constant volume bomb and …
elevated pressures and temperatures were carried out in a constant volume bomb and …
Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures
BM Gauthier, DF Davidson, RK Hanson - Combustion and Flame, 2004 - Elsevier
Autoignition characteristics of n-heptane/air, gasoline/air, and ternary surrogate/air mixtures
were studied behind reflected shock waves in a high-pressure, low-temperature regime …
were studied behind reflected shock waves in a high-pressure, low-temperature regime …
High-pressure oxidation of methane
H Hashemi, JM Christensen, S Gersen, H Levinsky… - Combustion and …, 2016 - Elsevier
Methane oxidation at high pressures and intermediate temperatures was investigated in a
laminar flow reactor and in a rapid compression machine (RCM). The flow-reactor …
laminar flow reactor and in a rapid compression machine (RCM). The flow-reactor …
Experimental and modeling study on ignition delays of lean mixtures of methane, hydrogen, oxygen, and argon at elevated pressures
Ignition delays of lean mixtures of methane–hydrogen with various hydrogen volumetric
contents were experimentally studied in a shock tube together with modeling analysis …
contents were experimentally studied in a shock tube together with modeling analysis …
Applications of quantitative laser sensors to kinetics, propulsion and practical energy systems
RK Hanson - Proceedings of the Combustion Institute, 2011 - Elsevier
Laser diagnostic techniques play a large and growing role in combustion research and
development. Here we highlight three areas where quantitative sensing based on laser …
development. Here we highlight three areas where quantitative sensing based on laser …