The morphology, size, and distribution of grains and secondary phases in 6063 aluminum
alloy significantly influence the comprehensive mechanical properties of alloys. In this study …

Abstract The 5xxx-series Al–Mg alloys are susceptible to plastic instabilities visible as stress
serrations during uniaxial tensile testing and known as the Portevin Le Chatelier (PLC) …

The hot deformation behaviour of two model Al–Mg–Si alloys was assessed. One alloy was
representative of the 6xxx series containing small additions of Mn and Cr, while the other …

The exceptional strengthening potential of scandium additions to aluminum was first
discovered in the 1960s. The impact that scandium additions have on the alloys' properties …

Abstract 6xxx-series Al alloys are the most commonly used alloys in the automotive industry
as they have an appropriate balance of strength, corrosion resistance and formability. These …

This research is devoted to the study effects of complex alloying of Al-0.3 wt.% Mg-1 wt.% Si
and Al-0.5 wt.% Mg-1.3 wt.% Si alloys by small additions of Sc and Zr on the microstructure …

In this work, we develop and assess two potential heat treatment methods tailored for the
effective utilization of Sc and Zr in an Al-Mg-Si model alloy.(Al, Si) 3 (Sc, Zr) dispersoids and …

The present work investigates the effects of Samarium (Sm) addition on the performance of
6063 Aluminum alloy. The investigation includes aspects related to the solidification …

This paper addresses the study of the complex effect of alloying elements (magnesium,
manganese, copper and zirconium) on changes in magnesium-rich aluminum alloy …

The study investigates the effect of casting speed on the solidification microstructure of the
aluminum alloy Al0. 3Mg1Si with and without the additions of zirconium and scandium …