General Rule of Phase Decomposition in Zn-Al Based Alloys (II)—On Effects of External Stresses on Phase Transformation—
Y hua Zhu - Materials Transactions, 2004 - jstage.jst.go.jp
Zn-Al based alloys have been commercially accepted for many years, since the first casting
alloy was developed at the New Jersey Zinc Company in 1922. The most popular die …
alloy was developed at the New Jersey Zinc Company in 1922. The most popular die …
High Throughput Correlative Electrochemistry-Microscopy Analysis on a Zn–Al Alloy
G Jayamaha, L Tegg, CL Bentley… - ACS Physical Chemistry …, 2024 - ACS Publications
Conventional electrodes and electrocatalysts possess complex compositional and structural
motifs that impact their overall electrochemical activity. These motifs range from defects and …
motifs that impact their overall electrochemical activity. These motifs range from defects and …
Friction and wear properties of Zn-25Al-based bearing alloys
T Savaşkan, RA Maleki - Tribology Transactions, 2014 - Taylor & Francis
A series of Zn-25Al-based ternary and quaternary alloys was prepared by permanent mold
casting and their dry sliding friction and wear properties were investigated using a block-on …
casting and their dry sliding friction and wear properties were investigated using a block-on …
Fatigue properties of zinc–aluminium alloys in 3.5% NaCl and 1% HCl solutions
M Aydın, T Savaşkan - International journal of fatigue, 2004 - Elsevier
A series of binary zinc–aluminium alloys were produced by permanent mould casting.
Fatigue behaviour of the alloys was investigated in 3.5% NaCl and 1% HCl solutions using a …
Fatigue behaviour of the alloys was investigated in 3.5% NaCl and 1% HCl solutions using a …
High-cycle fatigue behavior of severe plastically deformed binary Zn–60Al alloy by equal-channel angular extrusion
M Aydın - Journal of Materials Processing Technology, 2012 - Elsevier
High-cycle fatigue properties, mainly the fatigue strength and fatigue life, of two-phase Zn–
60Al alloy subjected to severe plastic deformation (SPD) via multi-pass equal-channel …
60Al alloy subjected to severe plastic deformation (SPD) via multi-pass equal-channel …
Microstructures of thermomechanically treated eutectoid Zn–Al alloy (II)
YH Zhu, FE Goodwin - Journal of materials research, 1995 - Springer
The evolution of microstructure in a cast, extruded, and aged eutectoid Zn-Al-Cu alloy is
described based on x-ray diffraction an micrographic observations. Whereas the three …
described based on x-ray diffraction an micrographic observations. Whereas the three …
Effects of tensile stress on microstructural change of eutectoid Zn-AI alloy
YH Zhu, E Orozco - Metallurgical and Materials Transactions A, 1995 - Springer
Microstructural changes and phase transformations of eutectoid Zn-Al-based alloy ZnA120.
2Cul. 8 (wt pct) were studied under tensile stress by using X-ray diffraction and scanning …
2Cul. 8 (wt pct) were studied under tensile stress by using X-ray diffraction and scanning …
Decomposition process in a Zn-22wt.% Al-2wt.% Cu alloy
HJ Dorantes-Rosales, VM López-Hirata… - Materials Science and …, 1999 - Elsevier
The decomposition process in a Zn-22wt.% Al-2wt.% Cu alloy was investigated during aging
at 373, 423 and 473 K, using XRD, SEM and TEM techniques. The results of X-ray diffraction …
at 373, 423 and 473 K, using XRD, SEM and TEM techniques. The results of X-ray diffraction …
Microstructures and dimensional stability of extruded eutectoid Zn Al alloy
YH Zhu, JJ Islas - Journal of materials processing technology, 1997 - Elsevier
Two microstructures were observed in extruded eutectoid Zn Al alloy. A new metastable
phase ηE′ was detected in both of the microstructures, possessing an hcp crystal …
phase ηE′ was detected in both of the microstructures, possessing an hcp crystal …