Methods for the fabrication of thin films with well controlled structure and properties are of
great importance for the development of functional devices for a large range of applications …

This work focused on the influence of annealing temperature on CoCr 2 O 4 nanoceramics
synthesized through a co-precipitation method without the aid of surfactants or templates …

Abstract The deposition of ZnO-CdO thin films are carried out using successive ionic layer
adsorption and reaction (SILAR) method at room temperature. The deposited ZnO-CdO thin …

Present work deals with the preparation of pure and Cu 2 O: Zn (0, 3, 5, and 7 wt%) using
the Nebulizer spray technique. The structural (XRD), morphology (AFM), energy dispersive …

Nanocrystalline CdO thin films were prepared onto a glass substrate at substrate
temperature of 300° C by a spray pyrolysis technique. Grown films were annealed at 250 …

Doped metal oxide semiconductors have received greater attention for the development of
gas sensor, working at low temperature, as well as of optoelectronics. In this work, a post …

Nanostructured cadmium oxide (CdO) thin films were deposited onto glass substrates using
the chemical bath deposition (CBD) technique. Different deposition parameters such as …

In this study, CdO thin films were deposited on glass substrates by using radio frequency
magnetron sputtering with different deposition times. The effects of the deposition time on …

Cadmium oxide (CdO) thin films were prepared with different concentrations of precursor
solution (0.05, 0.1, 0.15, 0.2 and 0.25 M, respectively) at the optimized temperature (200° C) …

Cd 1− x Co x O thin films (with molar ratios x= 0.0–8.0%) were grown onto glass substrates
via the sol–gel spin coating technique. XRD results indicate that a CdO single phase with a …