Casting magnesium alloys hold the greatest share of magnesium application products due
to their short processing period, low cost and near net shape forming. Compared with …

Precipitation strengthening is one of the most promising methods to develop magnesium
(Mg) alloys. However, the nerve-wracking fact is that the cast Mg alloys always have coarse …

Abstract Mg-8Li-6Y–2Zn alloy with high damping capacity and adequate strength was
prepared by heat treatment and hot rolling. Combined with density of states (DOS) …

Microstructure, electrical conductivity, and electromagnetic interference (EMI) shielding
effectiveness (SE) of cast Mg-xZn-yY (x= 2–5, y= 1–10) alloys were systematically …

In this study, three different morphologies of long-period stacking ordered (LPSO) phase, ie
lamellar, block-like, and rod-like, were obtained through various heat treatment processes …

The effect of Ho addition on the oxidation behavior of Mg-Zn-Y-Ho alloys was investigated at
500° C in air. The results show that Ho addition can improve the high-temperature oxidation …

The compression behavior and mechanical properties of the Mg-6.9 Gd-3.2 Y-1.5 Zn-0.5 Zr
(wt.%) alloy filled with intragranular long-period stacking ordered (LPSO) phases were …

The repetitive upsetting-extrusion (RUE) experiments of Mg-RE-Zn alloy were carried out to
study the grain refinement and texture evolution under different decreasing temperature …

The critical temperature (T hci) corresponding to the load relaxation measured during the
solidification of alloy in a 'T′-shaped mold is introduced into the Clyne-Davies' model, so …

In this study, the effects of Ca addition on the microstructure, thermal properties, and
mechanical properties of a Mg-6.0 Zn-1.2 Y-0.7 Zr (ZWK611) alloy at room temperature and …