Abstract In this study Digital Image Correlation (DIC) is utilized for measuring complex
fatigue crack paths under spatial mixed-mode loading conditions. Therefore, an existing …

The paper presents the results of an experimental investigation of the crack path and
description of fatigue crack growth in plane specimens made of S355 steel under tension …

In this work, an as-rolled AZ31 square bar with c-axis//ND (normal direction) texture was
used. Side-rolling and reciprocating torsion were performed to treat the bar. Microstructure …

The paper presents the test results of the microstructure, mechanical properties and fatigue
cracks obtained for zirconium-steel bimetal under cyclic bending. The research was carried …

This study describes the results of tests on the fatigue crack growth for constant moment
amplitude under cyclic bending in the ferritic-pearlitic structure. The tests were performed …

The work deals with the tests results of the growth of fatigue cracks subjected to torsion and
bending with torsion specimens at the constant amplitude loading and with zero or non-zero …

The paper presents a comparison of fracture plane position gained from experimental tests
of specimens under multiaxial loading and theoretical ones from calculation according to …

In this work, pre-compression along the extrusion direction was used to induce initial {10–
12} twins in the extruded AZ31 rod. The effects of initial twins on twinning behavior during …

The paper describes the experiments aimed at the extension of the method early proposed
for the uniaxial fatigue monitoring to the multiaxial modes of loading. The common …

In this study, a rolled AZ31 bar with square section was used. The reciprocating torsion was
performed to maintain the shape of the sample. The microstructure evolution of AZ31 bar …