Centrifugally cast functionally graded materials: Fabrication and challenges for probable automotive cylinder liner application
In response to stringent environmental rules and rising public awareness, internal
combustion (IC) engines have undergone fast improvement to reduce friction and wear in …
combustion (IC) engines have undergone fast improvement to reduce friction and wear in …
Dry sliding wear response of aluminium matrix composites (AMCs): a critical review
A Pateriya, MK Pradhan - Materials Research Express, 2023 - iopscience.iop.org
Researchers were compelled to create composites as alternatives to the already used
engineering materials due to the industrial desire for fresh, promising materials with superior …
engineering materials due to the industrial desire for fresh, promising materials with superior …
Structural performance of additively manufactured cylinder liner—a numerical study
Climate change is exacerbated by vehicle emissions. Furthermore, vehicle pollution
contributes to respiratory and cardiopulmonary diseases, as well as lung cancer. This …
contributes to respiratory and cardiopulmonary diseases, as well as lung cancer. This …
Effect of laser remelting on the microstructure and properties of the aluminum high silicon alloy coating
G Yang, B Fu, T Dong, G Li - Journal of Materials Processing Technology, 2024 - Elsevier
An aluminum high silicon alloy coating with the composition of AlSi30Cu5 was prepared by
the plasma spraying technology, and the coating was remelted by laser remelting process …
the plasma spraying technology, and the coating was remelted by laser remelting process …
Tribological Performance and Scuffing Resistance of Cast-Iron Cylinder Liners and Al-Si Alloy Cylinder Liners
C Li, X Chen, H Liu, L Dong, H Jian, J Wang, F Du - Coatings, 2023 - mdpi.com
In order to better determine the applicable working conditions of Al-Si alloy cylinder liners
and cast-iron cylinder liners, their tribological performance and scuffing resistance are …
and cast-iron cylinder liners, their tribological performance and scuffing resistance are …
Comparative Study on the tribological performance and wear behaviour of hypereutectic Al–Si cylinder liner surfaces textured using micro-drilling and mechanical …
AK Baby, PK Rajendrakumar - Wear, 2024 - Elsevier
Thermally-induced microstructural changes and the requirement of expensive equipment
are the deterring aspects of using laser-based texturing for tribological applications. This …
are the deterring aspects of using laser-based texturing for tribological applications. This …
Uncertainty Analysis of Friction and Wear-Rate of Cylinder Liner–Piston Ring Tribo Pair Under Boundary Lubrication Conditions
AK Baby, R PK, D Lawrence K - Journal of Tribology, 2024 - asmedigitalcollection.asme.org
Uncertainty analyses can improve the reliability and validity of the assessment of friction and
wear-rate of tribosystems. This work analyses the various sources of uncertainty in the …
wear-rate of tribosystems. This work analyses the various sources of uncertainty in the …
Investigating the load and temperature-dependent dry sliding wear performance of Al–12Ce alloys with Si and Mg additions
The current study investigates the effect of load and temperature on the wear characteristics
of gravity-cast Al–12Ce, Al–12Ce-X alloys (where X= 4Si, 0.4 Mg, and 4Si+ 0.4 Mg), and …
of gravity-cast Al–12Ce, Al–12Ce-X alloys (where X= 4Si, 0.4 Mg, and 4Si+ 0.4 Mg), and …
Effect of composite surface treatments on wear performance of Al-Si alloy cylinder liner
X Bian, X Han, J Luo, C Li, M Hao - Industrial Lubrication and …, 2023 - emerald.com
Purpose The purpose of this study is to prolong the service life of the Al–Si alloy cylinder and
achieve the objective of energy saving and emission reduction by the composite treatments …
achieve the objective of energy saving and emission reduction by the composite treatments …
Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy
F Akbari, M Golkaram, S Beyrami, G Shirazi… - International Journal of …, 2024 - Springer
The main objective of this work was to modify the microstructure and enhance the
tribological properties of a new Zn-4Si alloy through a high solidification cooling rate (SCR) …
tribological properties of a new Zn-4Si alloy through a high solidification cooling rate (SCR) …