Enhanced electrical properties of antimony doped tin oxide thin films deposited via aerosol assisted chemical vapour deposition
SD Ponja, BAD Williamson, S Sathasivam… - Journal of Materials …, 2018 - pubs.rsc.org
Transparent conducting oxides have widespread application in modern society but there is a
need to move away from the current 'industry champion'tin doped indium oxide (In2O3: Sn) …
need to move away from the current 'industry champion'tin doped indium oxide (In2O3: Sn) …
Towards sustainable energy. Generation of hydrogen fuel using nuclear energy
J Nowotny, T Hoshino, J Dodson, AJ Atanacio… - International Journal of …, 2016 - Elsevier
The increasing demand for sustainable energy results in the development of new
technologies of energy generation. The key objective of hydrogen economy is the …
technologies of energy generation. The key objective of hydrogen economy is the …
Hydrothermal synthesis of lithium-enriched β-Li 2 TiO 3 with an ion-sieve application: Excellent lithium adsorption
S Wang, P Li, W Cui, H Zhang, H Wang, S Zheng… - RSC …, 2016 - pubs.rsc.org
Lithium-enriched monoclinic lithium metatitanate (β-Li2TiO3) with a high molar ratio of Li to
Ti (2.11) was synthesized by a hydrothermal method. The related lithium ion-sieve (H2TiO3) …
Ti (2.11) was synthesized by a hydrothermal method. The related lithium ion-sieve (H2TiO3) …
The role of dopant charge state on defect chemistry and grain growth of doped UO2
Additives are widely used to control the microstructure of materials via their effect on defect
chemistry during sintering. As the primary nuclear fuel, the properties of UO 2 are crucial for …
chemistry during sintering. As the primary nuclear fuel, the properties of UO 2 are crucial for …
The defect chemistry of UO2±x from atomistic simulations
Control of the defect chemistry in UO 2±x is important for manipulating nuclear fuel
properties and fuel performance. For example, the uranium vacancy concentration is critical …
properties and fuel performance. For example, the uranium vacancy concentration is critical …
High adsorption performance of the Mo-doped titanium oxide sieve for lithium ions
S Wang, M Zhang, Y Zhang, Y Zhang, S Qiao, S Zheng - Hydrometallurgy, 2019 - Elsevier
Titanium oxide lithium ion sieve (Ti-LIS) is regarded as the most promising adsorbent due to
its highest theoretical lithium adsorption capacity and excellent stability among various other …
its highest theoretical lithium adsorption capacity and excellent stability among various other …
Enhancement of hydrogen desorption kinetics in magnesium hydride by doping with lithium metatitanate
Abstract Lithium metatitanate (Li 2 TiO 3) doped magnesium hydride (MgH 2) has been
investigated in this paper. Desorption properties of the sample with catalyst are compared to …
investigated in this paper. Desorption properties of the sample with catalyst are compared to …
The effect of Nb on the corrosion and hydrogen pick-up of Zr alloys
Zr-Nb alloys are known to perform better in corrosion and hydrogen pick-up than other Zr
alloys but the mechanism by which this happens is not well understood. Atomistic …
alloys but the mechanism by which this happens is not well understood. Atomistic …
The influence of alloying elements on the corrosion of Zr alloys
Density functional theory (DFT) and autoclave corrosion tests in 360° C water were used to
investigate the influence of Sb, Sc, Nb and Sn on the corrosion and hydrogen pick-up (HPU) …
investigate the influence of Sb, Sc, Nb and Sn on the corrosion and hydrogen pick-up (HPU) …
A convergent understanding of charged defects
Conspectus Historically, defects in semiconductors and ionic conductors have been studied
using very different approaches. In the solid-state ionics community, nonstoichiometry and …
using very different approaches. In the solid-state ionics community, nonstoichiometry and …