Preservation of metals in infrastructures and other assets requires cost-effective and
sustainable solutions such as green corrosion inhibitors. This study assesses an apple …

ABSTRACT A liquid mixture was developed from waste peony leaves through a zero-waste
chemical/biological process. The inhibition effect of different concentrations of peony leaves …

In this research, Ni–P and Ni–P/nano-SiC coatings were applied on the X70 steel substrate
successfully without any surfactant. Then, CO2 corrosion in the presence of acetic acid …

The corrosion behavior of 3Cr steels with three microstructures (martensite, bainite,
combined ferrite and pearlite) in simulated oil field formation water with a CO 2 partial …

This study addresses the challenge of preferential weld corrosion in ASTM A333 carbon
steel piping, investigating the intricate interplay of various factors. The welding process …

The long-term ability of Zero-Valent Iron (ZVI) in contaminant removal relies on the
effectiveness of iron to serve as electron donor, which makes it a versatile remediation …

Crevice corrosion of N80 carbon steel in CO 2-saturated environment containing acetic acid
(HAc) was studied by electrochemical measurements and surface analysis. No obvious …

AZ31 magnesium alloy is a promising implant metallic material for the process of healing
hard tissue in the human body. However, it is susceptible to degradation when exposed to …

The corrosion behaviour of N80 carbon steel under the coexistence of stress and crevice in
the CO 2-saturated NaCl solution containing acetic acid (HAc) was studied by …

Cu–P/micro-SiC and Cu–P/nano-SiC composite coatings were deposited by electroless
plating and their composition and microstructure were observed by EDX (energy-dispersive …