This article is a critical review of the Mn+ 1AXn phases (“MAX phases”, where n= 1, 2, or 3)
from a materials science perspective. MAX phases are a class of hexagonal-structure …

The more than 60 ternary carbides and nitrides, with the general formula M n+ 1AX n—
where n= 1, 2, or 3; M is an early transition metal; A is an A-group element (a subset of …

Within extruded Mg89Zn4Y7 (at.%) alloys containing a long period stacking ordered (LPSO)
phase a unique deformation mode referred to as “kink deformation” is found to occur within …

Nano metallic laminates (NMLs) exhibit different failure modes depending on the loading
conditions due to their mechanical anisotropies. Kinking is a typical failure mode in many …

Here, we report, for the first time, on the Raman spectra of Ti2AlN, Ti2AlC0. 5N0. 5,(Ti0. 5V0.
5) 2AlC, Ti3AlC2, and Ti3GeC2 and compare the results with those of Ti2AlC and V2AlC …

Thin films of M n+ 1 AX n layered compounds in the Ti-Si-C system were deposited on MgO
(111) and Al 2 O 3 (0001) substrates held at 900° C using dc magnetron sputtering from …

The dislocation configuration around low-angle kink boundaries formed in bent single
crystalline long-period stacking ordered (LPSO) Mg 85 Zn 6 Y 9 alloys was investigated …

The formation of ternary compounds within the Ti–Al–C system was studied by magnetron
sputtering for thin-film deposition and first-principles calculations for phase stability. As …

We report that magnetron sputtering can be applied to synthesize MAX-phase films of
several systems including Ti–Si–C, Ti–Ge–C, Ti–Al–C, and Ti–Al–N. In particular, epitaxial …

Mechanical properties of the MAX phases Page 1 Mechanical properties of the MAX phases
Barsoum, MW https://researchdiscovery.drexel.edu/esploro/outputs/bookChapter/Mechanical-properties-of-the-MAX-phases/991014632406404721/filesAndLinks?in …