A review on biomedical titanium alloys: recent progress and prospect

LC Zhang, LY Chen - Advanced engineering materials, 2019 - Wiley Online Library
Compared with stainless steel and Co–Cr‐based alloys, Ti and its alloys are widely used as
biomedical implants due to many fascinating properties, such as superior mechanical …

A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials

SS Sidhu, H Singh, MAH Gepreel - Materials Science and Engineering: C, 2021 - Elsevier
From the past few years, developments of β-Ti alloys have been the subject of active
research in the medical domain. The current paper highlights significant findings in the area …

A review of metastable beta titanium alloys

RP Kolli, A Devaraj - Metals, 2018 - mdpi.com
In this article, we provide a broad and extensive review of beta titanium alloys. Beta titanium
alloys are an important class of alloys that have found use in demanding applications such …

Trifunctional nanoprecipitates ductilize and toughen a strong laminated metastable titanium alloy

C Zhang, S Liu, J Zhang, D Zhang, J Kuang… - Nature …, 2023 - nature.com
Abstract Metastability-engineering, eg, transformation-induced plasticity (TRIP), can
enhance the ductility of alloys, however it often comes at the expense of relatively low yield …

Deformation twinning in body-centered cubic metals and alloys

X Li, Z Zhang, J Wang - Progress in Materials Science, 2023 - Elsevier
Deformation twinning is an important plastic carrier competing with the ordinary dislocation
slip in a broad class of crystalline solids, which critically controls the mechanical properties …

A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties

JA Ballor, T Li, F Prima, CJ Boehlert… - International …, 2023 - journals.sagepub.com
Since its discovery in 1954, the omega (ω) phase in titanium and its alloys has attracted
substantial attention from researchers. The β-to-ω and ω-to-α phase transformations are …

[HTML][HTML] Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate

J Gao, Y Huang, D Guan, AJ Knowles, L Ma, D Dye… - Acta Materialia, 2018 - Elsevier
Metastable β titanium alloys with both twinning (TWIP) and martensite transformation (TRIP)
usually exhibit a low yield strength of between 200 and 500 MPa, but high strain hardening …

ω phase acts as a switch between dislocation channeling and joint twinning-and transformation-induced plasticity in a metastable β titanium alloy

MJ Lai, T Li, D Raabe - Acta Materialia, 2018 - Elsevier
We have investigated the twinning-induced plasticity (TWIP) and transformation-induced
plasticity (TRIP) as well as the influence of ω phase on these two phenomena in a …

On the mechanism of {332} twinning in metastable β titanium alloys

MJ Lai, CC Tasan, D Raabe - Acta Materialia, 2016 - Elsevier
Abstract {332} twinning, an unusual twinning mode in other body-centered cubic (bcc)
metals and alloys, has been demonstrated to be a fundamental deformation mode in bcc …

Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions

S Ehtemam-Haghighi, G Cao, LC Zhang - Journal of Alloys and …, 2017 - Elsevier
In this work, the effect of Fe and Ta content on the microstructure and β phase stability of as-
cast designed Ti-xFe-yTa (x= 8, 9, 10 wt% and y= 0, 5, 8, 9, 10 wt%) alloys was investigated …