Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends

JA Glerum, C Kenel, T Sun, DC Dunand - Additive Manufacturing, 2020 - Elsevier
Selective laser melting is used to create Al-1.5 Sc, Al-1.5 Zr and Al-0.75 Sc-0.75 Zr (at.%)
alloys from blends of elemental Al, Sc, and Zr powders. This study investigates elemental …

Effect of varying bilayer spacing distribution on reaction heat and velocity in reactive Al/Ni multilayers

R Knepper, MR Snyder, G Fritz, K Fisher… - Journal of Applied …, 2009 - pubs.aip.org
Self-propagating reactions in Al/Ni nanostructured multilayer foils are examined both
experimentally and computationally to determine the impact of variations in reactant spacing …

Eutectic, precipitation-strengthened alloy via laser fusion of blends of Al-7Ce-10Mg (wt.%), Zr, and Sc powders

CN Ekaputra, D Weiss, JE Mogonye, DC Dunand - Acta Materialia, 2023 - Elsevier
Laser powder-bed fusion was used to create an Al-7Ce-10Mg-0.71 Zr-0.23 Sc (wt.%) alloy,
using hypoeutectic Al-7Ce-10Mg (wt.%) pre-alloyed powder blended with either elemental …

Phase stability and compressive properties of low-density (Zr50Ti35Nb15) 100-xAlx high entropy alloys

K Gao, JZ Wang, YH Meng, Y Li, Y Zhang - Intermetallics, 2022 - Elsevier
In the present study, phase stability and compressive mechanical properties of the (Zr 50 Ti
35 Nb 15) 100-x Al x (x= 0 to 30 at.%) high-entropy alloys were investigated. It was found …

Stability, elastic properties and electronic structures of the stable Zr–Al intermetallic compounds: A first-principles investigation

YH Duan, B Huang, Y Sun, MJ Peng… - Journal of alloys and …, 2014 - Elsevier
To better clarify and understand the phase stability and elastic properties of stable Zr–Al
binary intermetallic compounds, the structural properties, phase stability, elastic properties …

Simulation of reactive nanolaminates using reduced models: III. Ingredients for a general multidimensional formulation

M Salloum, OM Knio - Combustion and Flame, 2010 - Elsevier
A transient multidimensional reduced model is constructed for the simulation of reaction
fronts in Ni/Al multilayers. The formulation is based on the generalization of earlier …

Effect of thermal properties on self-propagating fronts in reactive nanolaminates

L Alawieh, OM Knio, TP Weihs - Journal of Applied Physics, 2011 - pubs.aip.org
The effects of thermal diffusion on flame front dynamics in a (1: 1) Ni/Al multilayered system
are computationally investigated. A systematic refinement of the thermal conductivity model …

Fe–Al phase formation around SHS reactions under isothermal conditions

E Pocheć, S Jóźwiak, K Karczewski, Z Bojar - Journal of Alloys and …, 2011 - Elsevier
This study investigates the phenomena preceding and accompanying the SHS reaction
between Fe and Al elemental powders during sintering. SEM and XRD analysis were used …

Self-propagating reactions in Al/Zr multilayers: anomalous dependence of reaction velocity on bilayer thickness

SC Barron, ST Kelly, J Kirchhoff, R Knepper… - Journal of Applied …, 2013 - pubs.aip.org
High temperature, self-propagating reactions are observed in vapor-deposited Al/Zr
multilayered foils of overall atomic ratios 3 Al: 1 Zr and 2 Al: 1 Zr and nanoscale layer …

Simulation of reactive nanolaminates using reduced models: II. Normal propagation

M Salloum, OM Knio - Combustion and Flame, 2010 - Elsevier
Transient normal flame propagation in reactive Ni/Al multilayers is analyzed
computationally. Two approaches are implemented, based on generalization of earlier …