Diffusion behavior and mechanical properties of Cu/Ni coating on TC4 alloy

Y Chen, S Liu, Y Zhao, Q Liu, L Zhu, X Song, Y Zhang… - Vacuum, 2017 - Elsevier
Diffusion process during heat treatment can be successfully employed to connect dissimilar
metals. In order to get interconnected plating structure with a good biological performance …

Tribological properties of Ni/Cu/Ni coating on the Ti-6Al-4V alloy after annealing at various temperatures

J Luo, N Wang, L Zhu, G Wu, L Li, M Yang, L Zhang… - Materials, 2020 - mdpi.com
Diffusion reaction was a crucial route to enhance the wear resistance of Ti-6Al-4V alloys
surface. In this work, the Ni/Cu/Ni composite layers were fabricated on the surface of Ti-6Al …

Oxidation, Mechanical and Tribological Behaviors of the Ni/cBN Abrasive Coating-Coated Titanium Alloys

YD Liu, JH Liu, WS Gu, HL Li, WH Li, ZL Pei… - Acta Metallurgica Sinica …, 2021 - Springer
In order to improve the oxidation and wear resistance of blades tip of titanium alloys as well
as the sealing performance of the gas turbine engine, a Ni/cBN abrasive coating was …

Additive preparation of conductive circuit based on template transfer process using a reusable photoresist

YM Zhu, J Tang, X Jin, TR Pan, Y Chang… - ACS applied materials …, 2020 - ACS Publications
To solve the problems of a conventional subtractive process for preparing conductive
circuits, numerous alternative additive processes have been investigated, such as screen or …

Preparation and properties of silver-coated copper powder with Sn transition layer

Q Xu, X Zhu, M Cao, J Long - Materials Research Express, 2019 - iopscience.iop.org
A silver-coated copper powder with an added transition Sn layer is obtained by electroless
plating, and the prepared composite powder is heat-treated under a protective atmosphere …