Degradation due to acetic acid in photovoltaic (PV) modules has been a commonly
observed phenomenon for both damp-heat exposure and outdoor operations. Acetic acid is …

With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical
limit, pushing conversion efficiencies even higher now relies on reducing every type of …

In this work, we present an integrated method for the deposition of TiO x through introducing
H2 plasma pulses into the atomic layer deposition process. The potential of TiO x films …

The current popularity of photovoltaic (PV) systems is due in large part to their exceptional
reliability and significantly lower cost than other energy sources. Studying cell and module …

Herein, we investigate the process–structure–properties relationships of in situ phosphorus
(P)‐doped polycrystalline silicon (poly‐Si) films by atmospheric pressure chemical vapor …

Herein, a novel metallization technique is reported for crystalline silicon heterojunction
(SHJ) solar cells in which silver (Ag) fingers are printed on the SHJ substrates by dispensing …

We demonstrate the usage of boron-doped polycrystalline-silicon (poly-Si) fabricated by
atmospheric pressure chemical vapor deposition for the formation of fired passivating …

Glass frit used in conductive silver (Ag) pastes has a significant impact not only on the
electrical performance but also on the long-term reliability of metallized electrodes in …

多晶硅氧化物(POLO) 结构是在晶硅表面依次生长一层极薄的界面氧化层与多晶硅层所形成的钝
化接触结构. 基于POLO 结构的钝化接触技术不仅能够获得优异的表面钝化特性 …

n-type silicon (Si) technologies played a major role in the early age of photovoltaics (PV).
Indeed, the Bell Laboratories prepared the first practical solar cells from n-type crystalline Si …