Crystalline silicon under acoustic cavitation: from mechanoluminescence to amorphization
M Virot, R Pflieger, EV Skorb, J Ravaux… - The Journal of …, 2012 - ACS Publications
The physicochemical behavior of crystalline silicon under acoustic cavitation is investigated
in water sparged with argon at low temperature (10 and 20° C). Surprisingly, spectroscopic …
in water sparged with argon at low temperature (10 and 20° C). Surprisingly, spectroscopic …
Erosion evolution in mono-crystalline silicon surfaces caused by acoustic cavitation bubbles
D Fernandez Rivas, J Betjes, B Verhaagen… - Journal of Applied …, 2013 - pubs.aip.org
The early stages (< 180 min) of cavitation erosion of silicon surfaces were studied for three
different crystallographic orientations. We introduce a quantity defined as the ratio of the …
different crystallographic orientations. We introduce a quantity defined as the ratio of the …
Intensification of iron–boron complex association in silicon solar cells under acoustic wave action
O Olikh, V Kostylyov, V Vlasiuk, R Korkishko… - Journal of Materials …, 2022 - Springer
In this paper, we study the influence of ultrasound (US) on the recovery of light-induced
degradation in Cz–Si solar cells. The complete recovery in the dark at near room …
degradation in Cz–Si solar cells. The complete recovery in the dark at near room …
[PDF][PDF] Enhancement of Porous Silicon Formation by Using Ultrasonic Vibrations
AH Al-Hamdani - Eng. Technol. Jour, 2012 - iasj.net
Anodic electrochemical etching enhanced by ultrasonically is developed to fabricate
luminescent porous silicon (PS) material. The samples prepared by the new etching method …
luminescent porous silicon (PS) material. The samples prepared by the new etching method …
[PDF][PDF] Effect of ultrasonic frequency on chemical etching process
YZ Dawood, AH Al-Hamdani, MQ Zayer - ARPN J. Eng. Appl. Sci, 2013 - researchgate.net
In this work, ultrasonically enhanced chemical etching was employed to fabricate porous
silicon layer. Porous silicon layer was fabricated in p-type (111) orientation silicon by using …
silicon layer. Porous silicon layer was fabricated in p-type (111) orientation silicon by using …