A review on flicker-free AC–DC LED drivers for single-phase and three-phase AC power grids
Light-emitting diodes (LEDs) are coming strongly into the lighting market due to their
advantages over conventional lighting solutions: energy efficient, controllable in both light …
advantages over conventional lighting solutions: energy efficient, controllable in both light …
A universal-input single-stag2e high-power-factor power supply for HB-LEDs based on integrated buck–flyback converter
Due to the high rise in luminous efficiency that high-brightness light-emitting diodes (HB-
LEDs) have experienced in recent years, many new applications have been researched …
LEDs) have experienced in recent years, many new applications have been researched …
A magnetically controlled single-stage AC–DC converter
In this letter, a magnetically controlled single-stage ac-dc converter is proposed for low-
power application which has the following features. First, single-stage operation is achieved …
power application which has the following features. First, single-stage operation is achieved …
A single-stage isolated AC–DC converter based on the impedance control network architecture
This article introduces a new single-stage universal-input isolated ac–dc converter based on
the impedance control network (ICN) architecture. This resonant converter performs both …
the impedance control network (ICN) architecture. This resonant converter performs both …
Evaluation of a low-cost permanent emergency lighting system based on high-efficiency LEDs
M Rico-Secades, AJ Calleja, J Ribas… - IEEE Transactions …, 2005 - ieeexplore.ieee.org
Nowadays, Permanent Emergency Lighting Systems (PELSs) are widely used in many
applications, including emergency exit indication and lighting in critical or strategic points …
applications, including emergency exit indication and lighting in critical or strategic points …
A novel single-stage high-power-factor electronic ballast with symmetrical topology
HL Cheng, CS Moo, WM Chen - IEEE Transactions on Industrial …, 2003 - ieeexplore.ieee.org
This paper proposes a novel single-stage high-power-factor high-efficiency electronic
ballast with symmetrical topology for fluorescent lamps. The circuit topology originates from …
ballast with symmetrical topology for fluorescent lamps. The circuit topology originates from …
High-efficient integrated electronic ballast for compact fluorescent lamps
In this paper, a single-stage high-power-factor high-efficiency electronic ballast for compact
fluorescent lamps is presented. The proposed topology uses two voltage sources connected …
fluorescent lamps is presented. The proposed topology uses two voltage sources connected …
A high-power-factor single-stage single-switch electronic ballast for compact fluorescent lamps
A very high power factor electronic ballast that uses a single switch in the power circuit is
proposed in this paper for compact fluorescent lamps (CFLs). The proposed power circuit is …
proposed in this paper for compact fluorescent lamps (CFLs). The proposed power circuit is …
Design and implementation of dimmable electronic ballast based on integrated inductor
SSM Chan, HSH Chung, YS Lee - IEEE Transactions on Power …, 2007 - ieeexplore.ieee.org
This paper presents an implementation of integrated inductor for typical dimmable electronic
ballasts having two power processing stages. The inductor used in the front-stage power …
ballasts having two power processing stages. The inductor used in the front-stage power …
Driver for high efficiency LED based on flyback stage with current mode control for emergency lighting system
M Rico-Secades, AJ Calleja, J Cardesin… - … Record of the 2004 …, 2004 - ieeexplore.ieee.org
Nowadays, permanent emergency lighting systems (PELS) are widely used in many
applications: emergency exit indication, lighting in critical or strategic points. Limitation in …
applications: emergency exit indication, lighting in critical or strategic points. Limitation in …