For their advantageous combinations of properties, metallic clad composites are popular in
numerous commercial and industrial branches. This study deals with measurement and …

In the present study, the microstructure and tensile properties of a Al/Cu/Zn/Ni multi-layered
composite after various accumulative roll bonding (ARB) passes were evaluated. The results …

AA1050/AA6061 multilayer composites were processed by combining accumulative roll
bonding (ARB) and cryorolling, followed by aging. The microstructure evolution and …

In the present study, for the first time, Young's modulus, anisotropy coefficient in the rolling
direction and other elastic and plastic parameters of multi-layered Al/Brass composite …

Increasing the strength of metallic multilayered composites fabricated through accumulative
roll bonding (ARB) is typically accompanied by a sacrifice in ductility. In the current work, we …

Ti/Cu multilayered composites were fabricated via accumulative roll bonding (ARB). During
co-deformation of the constituent metals, the hard Ti layers necked preferentially and then …

In this work, laminated Al/Ti composites were fabricated by hot rolling at three different
temperatures (400° C, 450° C and 500° C). The deformation behavior and fracture …

Cu/Nb multilayer composites with minimum individual layer thicknesses of≈ 2.8 μm are
achieved by accumulative roll bonding (ARB). The microstructural evolution and mechanical …

In the present research, Zn/Sn composites were produced for the first time by accumulative
roll bonding (ARB) process up to seven cycles. The microstructure evolution was evaluated …

Conventional lamellar-structured metallic composites usually have discontinuous interfaces
with limited diffusion in between two metals. Here, for the first time, we fabricated a bulk Ti …