An environmental-friendly procedure has been developed for the fabrication of pure silicon
carbide membranes on macroporous SiC support via ceramic processing. Water dispersions …

The effects were investigated of the starting particle size (ie, nanometer or submicrometer
powders), content of Y 3 Al 5 O 12 additives (YAG; in the range 5–20 wt.%), and difference of …

In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process
with potential new self-healing ability multicomponent submicronic Y-TZP/Al 2 O 3/SiC …

Abstract In this research, Suspension Plasma Spraying (SPS) technique was used for the
thermal deposition of a multicomponent mixture made up of an Y-TZP/Al 2 O 3 matrix with …

Multilayer materials have demonstrated to provide an efficient mechanism for toughening by
deflection of a propagating crack by weak interlayers. Therefore, the aim of this work is to …

The present research focuses on the effect of feedstock suspension solid concentration on
the microstructure of suspension plasma sprayed Y-TZP/Al 2 O 3/SiC composite coatings …

The influence was investigated of a graphite nanodispersoid addition on the lubricated
sliding-wear behaviour of liquid-phase-sintered (LPS) SiC ceramics fabricated by spark …

Polymerization reactions are frequently used in fabrication of a wide range of ceramic
components, from 3D elements (gelcasting, UV-curing), through thin tapes (gel-tape casting) …

Carbon nanotubes (CNTs) have occasionally been observed to benefit the aqueous
colloidal processing of nano-SiC with its nano-Y 3 Al 5 O 12 liquid-phase-sintering additives …

The effect of flaky hexagonal (h) BN additions (1, 5, and 10 vol.%) on the lubricated sliding-
wear behavior of fine-grained, liquid-phase-sintered SiC ceramics fabricated by spark …