The paper considers methods of accelerated determination of endurance limits of metals
and alloys based on the analysis of regularities in their inelastic deformation, strain and …

Данная работа посвящена теоретическому и экспериментальному изучению связи
поврежденности в композиционном материале с тензором упругих свойств четвертого …

A method is proposed of calculating the gradients of true stresses and strains in the stress
concentration zone in cyclic elastoplastic deformation of the material based on calculating …

A method of constructing the fatigue curves for individual specimens by measuring the
inelasticity characteristics on the reference level of the stress amplitude is proposed. If the …

Cyclic deformation behavior of metals and alloys under high-cycle loading in the nonuniform
stress state is considered. A significant effect of the stress gradient on the cyclic inelastic …

An accelerated method of determining the endurance limit from the cyclic strain diagram [7]
can be used to determine the endurance-limit distribution function. Comparison of the …

Based on the review of the available publications and the findings of the original studies, the
author demonstrates that with cyclic stresses in the maximum-stressed surface layer being …

Abstract n ultimate hardening model of materials has been developed, which is based on
allowance for hardening in the fatigue fracture zone. Using this model, the high-cycle life of …

Fatigue and cyclic inelasticity of austenitic steel upon long-term operation under various
loading conditions | SpringerLink Skip to main content Advertisement SpringerLink Log in Menu …

A procedure is suggested for calculating the change in plastic strain amplitude with
multicycle soft regular and programmed loading of cyclically weakening metals. The effect is …