[HTML][HTML] Slurry erosion of steel–Review of tests, mechanisms and materials
V Javaheri, D Porter, VT Kuokkala - Wear, 2018 - Elsevier
Slurry erosion is a severe problem and a major concern for slurry handling equipment, as it
leads to considerable expense caused by failures, downtime and material replacement …
leads to considerable expense caused by failures, downtime and material replacement …
A review on mechanisms and testing of wear in slurry pumps, pipeline circuits, and hydraulic turbines
J Singh - Journal of Tribology, 2021 - asmedigitalcollection.asme.org
This paper presents an overview about particulate wear that occurs in various components
of slurry pumps, pipeline systems, and hydraulic turbines due to the mechanical action …
of slurry pumps, pipeline systems, and hydraulic turbines due to the mechanical action …
Design of low hardness abrasion resistant steels
Abrasion resistant steels in combination with a good formability and a desirable balance of
strength and ductility are in high demand for industrial applications. Current developments of …
strength and ductility are in high demand for industrial applications. Current developments of …
An investigation of mechanical property and sliding wear behaviour of 400Hv grade martensitic steels
The wear performance and corresponding wear mechanism of a high strength low alloy
(HSLA) steel containing Mn, Cr, Ni and Mo are reported here. The wear performance of this …
(HSLA) steel containing Mn, Cr, Ni and Mo are reported here. The wear performance of this …
The effect of ferrite–martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel
A systematic experimental investigation concerning the effect of ferrite–martensite
morphology on the scratch and abrasion resistance of ferrite–martensite dual phase (DP) …
morphology on the scratch and abrasion resistance of ferrite–martensite dual phase (DP) …
Dry sliding wear behavior of low carbon dual phase powder metallurgy steels
Dry sliding wear behavior of Fe+ 0.3% graphite powder metallurgy processed (PM) steels
was investigated at constant sliding speed, load and distance. For this purpose, atomized …
was investigated at constant sliding speed, load and distance. For this purpose, atomized …
Effect of alternate corrosion and wear on the overall degradation of a dual phase and a mild steel
The present work investigates the alternate corrosion and wear effect on the overall
degradation of a dual phase and a mild steel. In case of corrosion-wear, immersion corroded …
degradation of a dual phase and a mild steel. In case of corrosion-wear, immersion corroded …
Effect of silicon content on the wear behavior of low-carbon dual-phase steels
The aim of this study is to understand the influence of the silicon content and volume fraction
of martensite obtained by intercritical annealing at three temperatures (750, 780, and 800° …
of martensite obtained by intercritical annealing at three temperatures (750, 780, and 800° …
Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: A statistical analysis over a larger data set
In the literature many researchers have tried to correlate the (dry) abrasion resistance of
steels to their standard mechanical properties as determined in simple tensile and hardness …
steels to their standard mechanical properties as determined in simple tensile and hardness …
Tribological behavior of a 0.33% C dual-phase steel with pre I/C hardening and tempering treatment under abrasive wear condition
The present study investigates the effect of prior hardening and tempering treatment on the
microstructure, mechanical properties, and high-stress abrasive wear response of 0.33 …
microstructure, mechanical properties, and high-stress abrasive wear response of 0.33 …