This work investigates the effects of various Al alloys (including Al, AlMg1SiCu, and
AlSi10Mg), mixed with 15wt% Fe2O3, on the selective laser melting (SLM) facilitated in situ …

In this study, the effects of cladding direction, preheating and post heat treatment on
microstructural and mechanical properties of laser cladded rail repairs are presented. Laser …

The effects of antimony (Sb) addition on the microstructure and mechanical properties of
rapidly solidified eutectic Al–Si alloy were investigated. Al–12wt.% Si–Xwt.% Sb (X= 0, 0.5 …

Aluminium alloys such as AA 6061-T6 are used to create forming optical surfaces in mould
cavities for the injection of plastic optical components. However, 6061-T6 aluminium is …

The microstructure and properties of nanostructured Cu-13.2 Al-5.1 Ni shape memory alloy
(SMA) were compared with those of initial coarse structure. The nanostructured Cu-Al-Ni …

A series of Alsingle bond 7Si based alloys with trace addition of Sr, Ce or P were prepared
using melt-spinning at two different high cooling rates, and the microstructure as well as the …

The objective of the present study is to explore the feasibility of producing 7075 Al alloy
ribbons with the increased microhardness via rapid solidification processing, namely melt …

Al alloys with nominal composition of Al 86 Cu 6 Y 6 Co 2, Al 86 Cu 6 Y 6 La 2 and Al 84 Cu
6 Co 2 Y 6 La 2 (at.%) were studied in as-spun and annealed states using differential …

The properties of nanostructured A357 ribbons produced by melt spinning were investigated
using field emission gun scanning electron microscope, X-ray diffraction pattern, differential …

Electrospark welding (ESW) electrodes were manufactured from three binary aluminum–
silicon alloys consisting of 12 and 17wt% silicon, produced using chill and sand casting. The …