Crystallization kinetics and nucleation activity of silica nanoparticle-filled poly (ethylene 2, 6-naphthalate)

SH Kim, SH Ahn, T Hirai - Polymer, 2003 - Elsevier
Silica nanoparticle-filled poly (ethylene 2, 6-naphthalate)(PEN) composites were melt-
blended to improve the mechanical and rheological properties of PEN. The melt viscosity …

Fabrication of polysulfone membrane with sponge-like structure by using different non-woven fabrics

H Wu, H Zhao, Y Lin, X Liu, H Yao, L Yu… - Separation and …, 2022 - Elsevier
The porous support layer with sponge-like structure has been widely used in thin-film
composite (TFC) membranes. A series of polysulfone (PSf) support membranes with …

Effect of modified carbon nanotube on the properties of aromatic polyester nanocomposites

JY Kim, SI Han, S Hong - Polymer, 2008 - Elsevier
Aromatic polyester nanocomposites based on poly (ethylene 2, 6-naphthalate)(PEN) and
carbon nanotube (CNT) were prepared by melt blending using a twin-screw extruder …

Surface‐modified silica nanoparticle–reinforced poly (ethylene 2, 6‐naphthalate)

SH Ahn, SH Kim, SG Lee - Journal of Applied Polymer Science, 2004 - Wiley Online Library
The effect of stearic acid modification on the dispersity of silica nanoparticles and the
adhesion between the filler and polymer matrix with stearic acid concentration were …

Effect of processing parameters of the continuous wet spinning system on the crystal phase of PVDF fibers

K Jeong, DH Kim, YS Chung, SK Hwang… - Journal of Applied …, 2018 - Wiley Online Library
ABSTRACT Poly (vinylidene difluoride)(PVDF) has been widely used in piezoelectric
applications as films and nanofiber mats, but there are limited publications on piezoelectric …

The effect of carbon nanotube on the physical properties of poly (butylene terephthalate) nanocomposite by simple melt blending

JY Kim - Journal of Applied Polymer Science, 2009 - Wiley Online Library
Polyester nanocomposites based on poly (butylene terephthalate)(PBT) and carbon
nanotube (CNT) were prepared by simple melt blending using a twin‐screw extruder. There …

Crystallization behaviors and mechanical properties of poly (ethylene 2, 6‐naphthalate)/multiwall carbon nanotube nanocomposites

JY Kim, SI Han, SH Kim - Polymer Engineering & Science, 2007 - Wiley Online Library
Carbon nanotube (CNT)‐reinforced poly (ethylene 2, 6‐naphthalate)(PEN) nanocomposites
were prepared by direct melt blending process in a twin‐screw extruder. There is significant …

Crystal structure evolution of UHMWPE/HDPE blend fibers prepared by melt spinning

F Wang, L Liu, P Xue, M Jia - Polymers, 2017 - mdpi.com
Ultra-high molecular weight polyethylene (UHMWPE) and high-density polyethylene
(HDPE) blend fibers with the highest tensile strength of 1.13 GPa were prepared by a melt …

Promoting co-crystallization in poly (butylene succinate) and poly (butylene fumarate) blends via end-group functionalization

XW Wei, C Chen, TY Wu, LH Cai, HM Ye - Molecules, 2022 - mdpi.com
Co-crystallization plays a crucial role in the integration and regulation of thermal and
mechanical properties in polymer blends, but the poor compatibility of the components in the …

Mechanical properties of silica nanoparticle reinforced poly (ethylene 2, 6-naphthalate)

SH Ahn, SH Kim, BC Kim, KB Shim, BG Cho - Macromolecular Research, 2004 - Springer
We added surface-modified silica nanoparticles to poly (ethylene 2, 6-naphthalate)(PEN) to
investigate their effect on the mechanical properties on the PEN nanocomposite material …