This paper describes the effect of silicon on the manufacturing process, structure, phase
composition, and selected properties of titanium aluminide alloys. The experimental …

In this work, the effect of Fe and Ta content on the microstructure and β phase stability of as-
cast designed Ti-xFe-yTa (x= 8, 9, 10 wt% and y= 0, 5, 8, 9, 10 wt%) alloys was investigated …

A group of Tisingle bondxNbsingle bond7Fe (x= 0, 1, 4, 6, 9, 11 wt.%) alloys was designed
and produced by cold crucible levitation melting process. The microstructural characteristic …

A series of Ti–7Fe–xNb (x= 0, 1, 4, 6, 9, 11 wt.%) alloys was designed and cast to investigate
the β→ α ″martensitic phase transformation, β phase stability, the resulting microstructure …

Abstract Ti-11Nb-xFe (x= 0.5, 3.5, 6, 9 wt.%) alloys were designed and fabricated by cold
crucible levitation melting to study the effects of Fe addition on their phase transition …

The effect of different heat treatment on electrochemical behavior of laser solid formed Ti–
6Al–4V alloy in 15 wt% NaCl solution was systematically investigated. Microstructure …

Grain characteristics exhibit significant effects on electrochemical machining. The effects of
the surface of grains on the electrochemical behaviour of laser solid formed Ti-6Al-4V …

Biomimetic texture could widen the application of titanium alloys materials in biological
fields. In this work, the electrochemical corrosion and unidirectional tribological properties of …

Fe–40wt% Ni alloys with granular shape and flake shape were prepared by a mechanical
alloying (MA) and annealing method. The phase composition and morphology of the FeNi …

Abstract Oxide-Carbon composites (TiO 2-C) and yttrium-doped TiO 2-C (Y: TiO 2-C),
synthesized via sol-gel route, were used as supports to photo-deposit platinum …