Approaches to polymer electrolyte membrane fuel cells (PEMFCs) and their cost
NG Moreno, MC Molina, D Gervasio… - … and Sustainable Energy …, 2015 - Elsevier
Cost analyses developed for fuel cells are reviewed, focusing mainly on polymer electrolyte
membrane fuel cell (PEMFC) technology, because the solid polymer membrane electrolyte …
membrane fuel cell (PEMFC) technology, because the solid polymer membrane electrolyte …
A review of polymer electrolyte membrane fuel cell durability test protocols
Durability is one of the major barriers to polymer electrolyte membrane fuel cells (PEMFCs)
being accepted as a commercially viable product. It is therefore important to understand their …
being accepted as a commercially viable product. It is therefore important to understand their …
Instability of supported platinum nanoparticles in low-temperature fuel cells
This paper discusses the mechanisms of surface area loss of supported platinum (Pt)
electrocatalysts in low-temperature fuel cells. It is argued that submonolayer dissolution of Pt …
electrocatalysts in low-temperature fuel cells. It is argued that submonolayer dissolution of Pt …
Two fuel cell cars in every garage?
05 Fall IF Pages 1-XX.indd Page 1 The Electrochemical Society Interface FEATURED
ARTICLES Two Fuel Cell Cars In Every Garage? To cite this article: Mark F. Mathias et al …
ARTICLES Two Fuel Cell Cars In Every Garage? To cite this article: Mark F. Mathias et al …
DOE fuel cell program: Durability technical targets and testing protocols
N Garland, T Benjamin, J Kopasz - ECS Transactions, 2007 - iopscience.iop.org
Fuel cells, especially those for transportation applications, must operate over a wide range
of operating and cycling conditions. The desired operating range encompasses …
of operating and cycling conditions. The desired operating range encompasses …
Perfluorosulfonic acid-functionalized Pt/carbon nanotube catalysts with enhanced stability and performance for use in proton exchange membrane fuel cells
To further improve lifetime and performance of carbon nanotube (CNT) supported Pt
catalysts for proton exchange membrane fuel cells, perfluorosulfonic acid (PFSA) was …
catalysts for proton exchange membrane fuel cells, perfluorosulfonic acid (PFSA) was …
Liquid water saturation and oxygen transport resistance in polymer electrolyte membrane fuel cell gas diffusion layers
Liquid water accumulation in the gas diffusion layers (GDLs) of polymer electrolyte
membrane (PEM) fuel cells is governed by a complex interplay of factors, the full scope of …
membrane (PEM) fuel cells is governed by a complex interplay of factors, the full scope of …
Polymer electrolyte fuel cells: science, applications, and challenges
AA Franco - 2016 - books.google.com
This book focuses on the recent research progress on the fundamental understanding of the
materials degradation phenomena in PEFC, for automotive applications. On a …
materials degradation phenomena in PEFC, for automotive applications. On a …
Performance of individual cells in polymer electrolyte membrane fuel cell stack under-load cycling conditions
The performance of a ten-cell 50 cm 2 100 W polymer electrolyte membrane fuel cell
(PEMFC) stack was evaluated under dynamic load cycling conditions utilizing the 2005 …
(PEMFC) stack was evaluated under dynamic load cycling conditions utilizing the 2005 …
Materials for state-of-the-art PEM fuel cells, and their suitability for operation above 100 C
FA de Bruijn, RC Makkus, RKAM Mallant… - Advances in fuel …, 2007 - Elsevier
This review gives an overview of proton exchange membrane (PEM) fuel cells on the
materials level. Materials for proton conducting mesmbranes, electrodes and bipolar plates …
materials level. Materials for proton conducting mesmbranes, electrodes and bipolar plates …