This study looked at commercial particleboard treatment with 200 ppm nanosilver (NS) and
nanocopper (NC) suspensions (10–80 nm) to assess the effects on hardness and resistance …

The effects of impregnation with nanosilver suspension as well as heat treatment on pull-off
adhesion strength and specific air permeability in beech specimens were studied here. The …

Abstract Effects of densification of poplar wood (Populus nigra) impregnated with nano-
aluminum oxide (NA) and pre-treated with water vapor for 4 and 6 h were investigated in the …

Fibre direction cylindrical specimens from the sapwood and heartwood areas of Paulownia
wood were heat treated at 180, 190, and 200° C split in eight groups of ten specimens each …

The effect of nano-wollastonite and Aspergillus niger fungus on permeability of historical
and common paper was studied here. Specimens were immersed in aqueous wollastonite …

The present study investigated the effect of heat treatment on the relative amount of
cellulose in untreated and nanosilver-impregnated poplar wood (Populus alba). The impacts …

We studied the effect of wollastonite nanofibers on fluid flow in medium-density fiberboard
(MDF). Nanowollastonite (NW) was applied in MDF at 10%, based on the dry weight of wood …

Résumé L'étude porte sur les effets de l'ajout de nano-wollastonite (NW) et de résidus de
palmier-dattier sur les propriétés physiques et mécaniques de panneaux de fibres à densité …

English Medium-density fiberboards (MDF) were produced, using two different resins of urea-
formaldehyde (UF) and phenol-formaldehyde (PF) at 10% and 8% contents, respectively. In …

Effect of wollastonite nanofibers on biological resistance of historical paper against
Aspergillus niger was studied. Specimens from A4 papers were also prepared for …